Anisotropic source modelling for turbulent jet noise prediction
نویسندگان
چکیده
منابع مشابه
Simulation and Modeling of Turbulent Jet Noise
Jet noise reduction remains an important long-range goal in commercial and military aviation. Comparedwith their early counterparts, modern, ultrahigh-bypass-ratio turbofans on commercial aircraft are very quiet, but evermore stringent noise regulations dictate further reductions. In addition, hearing loss bypersonnel and community noise issues are prompting the military to seek noise reduction...
متن کاملPrediction of Jet Noise Shielding
This study is motivated by the development of aircraft that use jet noise shielding by the airframe. Current methods to predict shielding from aircraft surfaces rely on formulae developed for diffraction of sound from omnidirectional point sources. However, the jet noise source is distributed and directional, thus requiring a different approach. In this study, the jet noise source is modeled as...
متن کاملNoise prediction of a subsonic turbulent round jet using the lattice-Boltzmann method.
The lattice-Boltzmann method (LBM) was used to study the far-field noise generated from a Mach, M(j)=0.4, unheated turbulent axisymmetric jet. A commercial code based on the LBM kernel was used to simulate the turbulent flow exhausting from a pipe which is 10 jet radii in length. Near-field flow results such as jet centerline velocity decay rates and turbulence intensities were in agreement wit...
متن کاملWavepacket Modeling of the Jet Noise Source
This research is motivated by the need for physical models for the jet noise source to be used in practical noise prediction schemes for propulsion-airframe integration concepts. The emphasis is on jets with high-subsonic velocities typical of modern turbofan engines. The basis for the source model is an amplitude-modulated traveling wave the wavepacket. Its parameters are determined by minimiz...
متن کاملPrediction of turbulent heat transfer in impinging jet geometries
This chapter summarizes the current knowledge on the numerical prediction of turbulent impinging jet flows. The predictive capabilities of numerical models are evaluated by careful comparison with experimental fluid flow and heat transfer data. Turbulent fluctuations in the velocity field are mathematically modelled using the Reynolds Averaged Navier–Stokes (RANS) methodology. Turbulence is ass...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
سال: 2019
ISSN: 1364-503X,1471-2962
DOI: 10.1098/rsta.2019.0075