Anisotropic behavior of TiB2 nanoparticles reinforced 2024Al composites rolling sheet
نویسندگان
چکیده
منابع مشابه
Study on Machining Parameters of TiB2 Reinforced Aluminum 6063 Composites
In this experimental study, three TiB2/Al metal matrix composites (MMCs) with 40 μm in mean size were produced using a melt stirring squeeze casting route. Test was carried out to find the parameters influencing surface roughness (Ra) and material removal rate (MRR) on machining the TiB2 reinforced Al-6063 composite materials. The orthogonal array, the signal-to-noise ratio, and analysis of var...
متن کاملComparative Analysis Of Aluminium Metal Matrix Composites Reinforced With TiC And TiB2 Using Stir Casting Process
Composite materials are playing major and vital role in various sectors especially in aeronautical, defence and automotive sectors. It is preferable because of obtaining unique characteristics such as high specific strength, high stiffness, high corrosion resistance and low density. In the present work deals with the influence of Titanium carbide and Titanium boride reinforcements in different ...
متن کاملCreep Behavior of Basalt and Glass Fiber Reinforced Epoxy Composites
The creep behavior of basalt fiber reinforced epoxy (BFRE) and glass fiber reinforced epoxy (GFRE) composites was studied through tensile testing at high temperature. To study the effect of reinforcing epoxy, the micro glass powder (MGP) was added at various volume percentage into the epoxy resin in BFRE composites. The initial strain for all the specimens were evaluated and compared with each ...
متن کاملFlexural Behavior of Cementitious Composites Reinforced by Synthetic Fibers
The application of fibers to reinforce cementitious materials is a well-known subject. At first, asbestos fibers are used in industrial process to produce fiber reinforced cement sheets. Thereafter, various types of synthetic fibers are produced and used as asbestos substitutes. The aim of the present work is to evaluate the effect of synthetic fibers on the flexural behavior of cementitious co...
متن کاملSintered Steel Composites Reinforced with Ceramic Nanoparticles: Fabrication, Characteristics and Wear Behavior
Steel composites reinforced with alumina nanoparticles were prepared by powder metallurgy process. Samples containing two different amounts of carbon (0.35 and 0.55 wt.%) and 0-5 wt.% Al2O3 nanoparticles were fabricated by mixing, compacting and sintering of diffusion bonded Distaloy AE powder. The density, hardness and wear tests were performed on the prepared samples. Fu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Characterization
سال: 2020
ISSN: 1044-5803
DOI: 10.1016/j.matchar.2020.110196