Angular solar absorptance and thermal stability of W/WAlN/WAlON/Al2O3-based solar selective absorber coating

نویسندگان
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Nano-Cr-film-based solar selective absorber with high photo-thermal conversion efficiency and good thermal stability.

Optical properties and thermal stability of the solar selective absorber based on the metal/dielectric four-layer film structure were investigated in the variable temperature region. Numerical calculations were performed to simulate the spectral properties of multilayer stacks with different metal materials and film thickness. The typical four-layer film structure using the transition metal Cr ...

متن کامل

The Stability and Thermal Performance of a Small Solar pond

A small salt gradient solar pond with an average surface area of 1.8 m2 and depth of 0.8m has been tested. The depths of storage, gradient and surface zones are 0.3, 0.27 and 0.07m, respectively. The temperature of the storage zone for the summer days reaches its maximum of 65˚ C after about 8 days. Daily variation of the storage zone temperature was about 8˚C which is due to small volume of th...

متن کامل

The Stability and Thermal Performance of a Small Solar pond

A small salt gradient solar pond with an average surface area of 1.8 m2 and depth of 0.8m has been tested. The depths of storage, gradient and surface zones are 0.3, 0.27 and 0.07m, respectively. The temperature of the storage zone for the summer days reaches its maximum of 65˚ C after about 8 days. Daily variation of the storage zone temperature was about 8˚C which is due to small volume of th...

متن کامل

Selective Solar Absorber Materials: Nanostructured Surfaces

Current solar to thermal energy conversion technologies, including concentrated solar power (CSP) and solar water heaters (SWH) utilize absorber surfaces that collect incident solar radiation. However, these absorber surfaces emit thermal energy (at their temperature) in the infrared (IR) spectrum, resulting in decreased overall efficiency for solar-to-thermal conversion. Selective absorber sur...

متن کامل

High performance Thermal Coating Comprising (CuO:NiO) Nanocomposite/C Spectrally Selective to Absorb Solar Energy

A novel nanocomposite consisted of nanomaterials as (CuO:NiO) and carbon (fuel ash) were designed to absorb solar energy. Thin films were made via casting and spin coating of the dopants nanocomposite thin films, containing different concentration ratios of CuO:NiO. These thin films are precipitated on a glass and copper substrates. The optical properties of the doped fuel ash films with na...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Applied Thermal Engineering

سال: 2016

ISSN: 1359-4311

DOI: 10.1016/j.applthermaleng.2016.04.069