Analyzing TENORM in Hydraulic Fracturing Wastes

Spectrum Quantification of Radium Isotopes in Hydraulic Fracturing Wastes

Exploration of oil and natural gas from shale deposits can bring to the surface radioactivity. Naturally occurring Uranium-238 and Thorium-232 as part of their decay chains can produce radium isotopes, which are themselves precursors of radon gas. Due to the solubility of radium and its contaminated impact on the environments and health concerns, regulations on the levels of Ra226 and Ra228 in ...

Hydraulic and Pneumatic Fracturing

Downblending Contaminated Radioactive Wastes

Dilution is the mixing of radioactive waste with non-radioactive material, whereas downblending is the mixing of high-level radioactive waste with low-level radioactive waste. These processes have been applied predominantly at nuclear sites as part of the decontamination procedures for the disposal of blended wastes in licensed facilities. Proper health and safety assessments should be carried ...

Energy Analysis of Hydraulic Fracturing

In this paper, numerical simulations of circular boreholes under internal hydraulic pressure are carried out to investigate the energy transferred to the surrounding rock and the breakdown pressure. The simulations are conducted by using a micromechanical continuum damage model proposed by Golshani et al. (2006). The simulation results suggest that the borehole breakdown pressure and the energy...

Complex Fluids and Hydraulic Fracturing.

Nearly 70 years old, hydraulic fracturing is a core technique for stimulating hydrocarbon production in a majority of oil and gas reservoirs. Complex fluids are implemented in nearly every step of the fracturing process, most significantly to generate and sustain fractures and transport and distribute proppant particles during and following fluid injection. An extremely wide range of complex fl...