Analytical Prediction of Temperature Distribution in Cylinder Liner during Various Boring Operations
نویسندگان
چکیده
منابع مشابه
Analytical modeling of temperature distribution in an anisotropic cylinder with circumferentially-varying convective heat transfer
Article history: Received 19 March 2014 Received in revised form 21 August 2014 Accepted 22 August 2014
متن کاملPrediction of Temperature Distribution in the Hot Torsion Test Specimen
Hot torsion test (HTT) has extensively been used to analysis and physically model flow behavior and microstructure evolution of materials and alloys during hot deformation processes. In this test, the specimen geometry has a great influence in obtaining reliable test results. In this paper, the interaction of thermal-mechanical conditions and geometry of the HTT specimen was studied. The commer...
متن کاملNumerical Prediction of Temperature Distribution in Transient RTM Process
Resin Transfer Molding (RTM) is a composite manufacturing process. A preformed fiber is placed in a closed mold and a viscous resin is injected into the mold. In this paper, a model is developed to predict the flow pattern, extent of reaction and temperature change during filling and curing in a thin rectangular mold. A numerical simulation is presented to predict the free surface and...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Analytical Modeling of Chatter Stability in Turning and Boring Operations: A Multi-Dimensional Approach
In this study, an analytical model for the stability of turning and boring processes is proposed. The proposed model is a step ahead from the previous studies as it includes the dynamics of the system in a multidimensional form, uses the true process geometry and models the insert nose radius in a precise manner. Simulations are conducted in order to compare the results with the traditional ori...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Advanced Mechanical Design, Systems, and Manufacturing
سال: 2008
ISSN: 1881-3054
DOI: 10.1299/jamdsm.2.278