Analytical Prediction of Cutting Edge Chipping in Interrupted Turning Operation (3rd Report)

Multi Objective Optimization of Cutting Parameters in Turning Operation to Reduce Surface Roughness and Cutting Forces

Analytical Prediction of Stability Limit in Turning Operations

Unstable cutting due to chatter vibrations is one of the most important problems during metal cutting operations. Chatter can be a limitation for productivity and surface quality in turning operations, especially when long and slender tools and parts are involved. In this study, an analytical stability method for turning process is presented. The model takes the cutting geometry into considerat...

prediction of ignition delay period in d.i diesel engines

a semi-empirical mathematical model for predicting physical part of ignition delay period in the combustion of direct - injection diesel engines with swirl is developed . this model based on a single droplet evaporation model . the governing equations , namely , equations of droplet motion , heat and mass transfer were solved simultaneously using a rung-kutta step by step unmerical method . the...

Surface Quality and Tool Wear in Interrupted Hard Turning of 1137 Steel Shafts

1. INTRODUCTION The machining of hardened steel components with PcBN inserts having a geometrically defined cutting edge has gained substantially in importance due to improvements in the performance of such modern cutting tool materials. Hard turning is increasingly a profitable alternative to finish grinding. The objective is to remove workpiece material in a single cut rather than a lengthy g...

Simulation of Cutting Process in Turning

This paper presents simulation of cutting process by turning of polyamide PA 66, the simulation based on approach Arbitrary Lagrangian Eulerian, ALE. Was taken into account a tool knife CNMA from Coromant. The flow stress of the workpiece is modeled as function of strain, strain rate and temperature, so as to reflect its dynamic changes in physical properties. In this way, the influences of dep...