Analytical Investigation of the Micro Groove Surface Topography by Micro-Milling

Review of Micro-Particles of Hydroxyapatite Nanoparticles by Ball Milling

Hydroxyapatite (HA) is the most important bioactive ceramics because of biocompatibility and structural similarity to the mineral part of bones and teeth of broad clinical application in the field of dentistry, orthopedic and coatings are Biomaterials. The aim of this study was to construct nano-hydroxyapatite micro particles using calcite, silica and zinc oxide using ball milling, powder, thes...

Investigation of laser milling process characteristics for micro tooling applications

2d model of floor surface roughness in micro milling operation

the micro milling operation is one of the manufacturing processes, which can produce 3d parts in the range of less than a millimetre. miniaturization of components results in increasing the ratio of surface area to volume of components, which in turn increases the role of surface on the component performance. therefore, anticipating the relationship between micro milling parameters and surface ...

Laser milling for micro tooling

Laser milling provides a new method of producing components for the micro tool manufacturing industry. This paper considers the technical capabilities of laser milling when applied to the machining of components for micro tooling. Characteristics important for laser milling as a micro tooling manufacturing process are reviewed. These characteristics are surface finish, aspect ratio, dimensional...

Fabrication of Microfluidic Channel Using Micro End Milling and Micro Electrical Discharge Milling

This paper discusses the fabrication of microfluidic channels using micro end milling and micro electrical discharge (ED) milling on metals and polymers. The width of the microchannels fabricated by micro end milling was 100-800 μm with 1-2 aspect ratio. The average surface roughness values were 100-200 nm and 80-120 nm on metals and polymers respectively. The end milling was found to form more...