Analytical and Numerical Modeling of Flow in a Fractured Gneiss Aquifer

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Lattice Boltzmann modeling for tracer test analysis in a fractured Gneiss aquifer

Fractured Gneiss aquifers present a challenge to hydrogeologists because of their geological complexity. Interpretation methods which can be applied to porous media cannot be applied to fractured Gneiss aquifers because flow and transport occur in fractures, joints, and conduits. In contrast, the rock matrix contribution to groundwater flow is not very important in Gneiss aquifers. Sodium chlor...

متن کامل

Transient Fluid Flow Modeling in Fractured Aquifer of Sechahoon Iron Mine Using Finite Element Method

Considering the fact that a large volume of iron reserve in the Sechahoon Iron Mine in Yazd Province has located under the water table, it is necessary to conduct a comprehensive study on water flow within the pit and its surroundings. The conceptual model of the aquifer was created using surface and underground geological information compared with water table data of the area of interest. In t...

متن کامل

A comparison between numerical and analytical modeling of ECAP

Recent developments in nanostructured products draw considerable attention to ultrafine grained materials. These materials are normally manufactured by different severe plastic deformation (SPD) methods. In the present study, analytical models and finite element method (FEM) are used to calculate strain imposed to a specimen that was deformed by equal channel angular pressing (ECAP). In additio...

متن کامل

A Generalized Numerical Approach for Modeling Multiphase Flow and Transport in Fractured Porous Media

A physically based numerical approach is presented for modeling multiphase flow and transport processes in fractured rock. In particular, a general framework model is discussed for dealing with fracture-matrix interactions, which is applicable to both continuum and discrete fracture conceptualization. The numerical modeling approach is based on a general multiple-continuum concept, suitable for...

متن کامل

A Mass Conservative Method for Numerical Modeling of Axisymmetric flow

In this paper, the cell-centered finite volume method (CC-FVM) has been presented to simulate the axisymmetric radial flow toward a pumping well. The model is applied to the unstructured triangular grids which allows to simulate inhomogeneous and complex-shaped domains. Due to the non-orthogonality of the irregular grids, the multipoint flux approximation (MPFA) methods are used to discretize t...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of Water Resource and Protection

سال: 2012

ISSN: 1945-3094,1945-3108

DOI: 10.4236/jwarp.2012.48076