Analytical and Experimental Determination of the Ra Surface Roughness during Turning
نویسندگان
چکیده
منابع مشابه
Experimental Investigation of Surface Roughness in Turning Operation of 16MNCR5
Machining operations are involv3ed in many manufacturing industries. Turning process is one of the most fundamental cutting processes. Cutting used in metal cutting. Surface finish and dimensional tolerances are used to determine quality of product and are the important quality attributes of turned product. In the present paper of investigation the experimental work has been employed for the op...
متن کاملExperimental Study & Modeling of Surface Roughness in Turning of Hardened AISI 4340 Steel Using Coated Carbide Inserted
Turning of hardened steels using a single point cutting tool has replaced the cylindrical grinding now as it offers attractive benefits in terms of lower equipment costs, shorter set up time, fewer process setups, higher material removal rate, better surface quality and elimination of cutting fluids compared to cylindrical grinding. In order to obtain desired surface quality by machining, pr...
متن کاملSurface Roughness Control Simulation of Turning Processes
The machining quality on computerized numerically controlled (CNC) machine tools is sensitive to the machining parameters. With modern machine tools, an operator still manually adjusts controlling parameters, such as feed rate and cutting speed. The adjusted values mainly depend on operator experience and knowledge. Standard machining catalogues and commercial cutting condition prediction softw...
متن کاملThe Determination of Empirical Model for Surface Roughness in Turning Process Using Design of Experiment
The purpose of this research is to determine the empirical model for surface roughness in a turning process. This process is performed in the final assembly department at a manufacturing company which supplies fluid dynamic bearing (FDB) spindle motors for hard disk drives (HDDs). The workpieces used were the sleeves of FDB motors made of ferritic stainless steel, grade AISI 12L14. A 2 factoria...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Engineering
سال: 2011
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2011.11.124