Analysis on Vibration Characteristics of Air Film Damping with Open Boundaries
نویسندگان
چکیده
منابع مشابه
Buckling and vibration analysis of angle -ply symmetric laminated composite plates with fully elastic boundaries
The main focus of this paper is on efficiency analysis of two kinds of approximating functions (characteristic orthogonal polynomials and characteristic beam functions) that have been applied in the Rayleigh-Ritz method to determine the non-dimensional buckling and frequency parameters of an angle ply symmetric laminated composite plate with fully elastic boundaries. It has been observed that o...
متن کاملNonlinear Vibration Analysis for a Jeffcott Rotor with Seal and Air-Film Bearing Excitations
The nonlinear coupling vibration and bifurcation of a high-speed centrifugal compressor with a labyrinth seal and two air-film journal bearings are presented in this paper. The rotary shaft and disk are modeled as a rigid Jeffcott rotor. Muszynska’s model is used to express the seal force with multiple parameters. For air-film journal bearings, the model proposed by Zhang et al. is adopted to e...
متن کاملSqueeze Film Air Damping in Tapping Mode Atomic Force Microscopy
In dynamic plowing lithography, the sample surface is indented using a vibrating tip in tapping mode atomic force microscopy. During writing, the gap between the cantilever and the sample surface is very small, usually on the order of micrometers. High vibration frequency and small distance induce squeeze film air damping from the air in the gap. This damping can cause variations in the cantile...
متن کاملThe Analysis of Vibration Characteristics and Motion Stability of the Tracked Ambulance Nonlinear Damping System
Considering the impact of the nonlinear stiffness, a 2 DOF dynamic nonlinear vibration model with cubic terms was established according to the structural feature and nonlinear behavior of the tracked ambulance. In the case of primary resonance and 1: 1 internal resonance, multiple scale method was used to obtain a first-order approximate solution for this model. Taking the parameters of the tra...
متن کاملVibration Characteristics and Damping Analysis of the Blisk-Deposited Hard Coating Using the Rayleigh-Ritz Method
For the purpose of improving the working reliability of the blisk (integrally-bladed disk) under severe environment, a passive vibration reduction method by depositing a hard coating on both sides of blades is developed and then investigated systematically. Firstly, an analytical model of the blisk-deposited hard coating is taken into account. Secondly, by using the Oberst beam theory and axial...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Mathematical Problems in Engineering
سال: 2019
ISSN: 1024-123X,1563-5147
DOI: 10.1155/2019/1414872