Analysis of the GTAW Process Influence on UNS S32760 Superduplex Steel Microstructure and Corrosion Resistance
نویسندگان
چکیده
منابع مشابه
Influence of multiple welding cycles on microstructure and corrosion resistance of a super duplex stainless steel
.......................................................................................... v Appended Publications .................................................................. vii Table of
متن کاملcontent analysis of l1 and l2 writing textbooks and the perception analysis of university professors on the influence of english writing expertise on the persian in an efl context
the importance of writing as a complex skill in applied linguistics has drawn the attention of many researchers to evaluate textbooks in order to help learners gain self-sufficiency and autonomy in the field of language use and communication. investigations have shown that developments in textbooks evaluation can promote the quality of pedagogies and consequently the learning. this study attemp...
Synergistic effects of micro-abrasion–corrosion of UNS S30403, S31603 and S32760 stainless steels
In this study, the synergistic effects of abrasion and corrosion on UNS S30403, S31603 and S32760 stainless steels have been investigated using micro-abrasion test rig. The stainless steel samples have been studied under both pure abrasion (PA) and abrasion–corrosion (AC) conditions imulated by using silicon carbide based slurries in either distilled water or 3.5% sodium chloride solutions. Tes...
متن کاملThe Influence of Homogenization and Solution Annealing Process on the Microstructure and Mechanical Properties of 1.4470 Ferritic-austenitic Stainless Steel
In the present research, the effect of the homogenization process and annealing temperature were investigated for the 1.4470 ferritic-austenitic stainless steel in the as-cast condition. In this regard, microstructural evolutions, hardness, and impact energy of the steel was evaluated with different heat treatment conditions. The results show that the minimum volume fraction of austenite phase ...
متن کاملEffect of the TLP process parameters on microstructure, mechanical properties and corrosion resistance of 316L stainless steel to pure commercial titanium joint with pure copper interface
In this research, effect of time and temperature of TLP process on the microstructure, mechanical properties and corrosion resistance of CP-Ti to 316L stainless steel joint evaluated. For this purpose pure copper foil with 100 µm thickness was used as interlayer and joining process carried out at 950˚C, 1000˚C and 1050˚C and for 90, 120 and 150 minutes. After the joining process, shear and micr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Revista Virtual de Química
سال: 2016
ISSN: 1984-6835
DOI: 10.21577/1984-6835.20160074