Analysis of the Flow over Broad Crested Side Weir by Using Three-Dimensional Numerical Simulation

Developing the Numerical method and MLP Model to simulation of flow over side weir

Side weir is a type of weirs that used extensively in a variety ofengineering projects such as river engineering, dam,waste water , Irrigation and drainage network. So the study on the flow characteristics on the type weir, is one of the mostimportant topics in hydraulic engineering. The spatially varied flow (S.V.F)with discharge decreasing is governing equation to this type weir.Study on the ...

Three-dimensional numerical modeling of score hole in rectangular side weir with finite volume method

Local scouring in the downstream of hydraulic structures is one of the important issues in river and hydraulic engineering, which involves a lot of costs every year, so the prediction of the rate of scour is important in hydraulic design. Side weirs are the most important of hydraulic structures that are used in passing flow. This study investigate the scouring due to falling jet from side weir...

Three-dimensional numerical simulation of temperature and flow fields in a Czochralski growth of germanium

For a Czochralski growth of Ge crystal, thermal fields have been analysed numerically using the three-dimensional finite volume method (FLUENT package). The arrangement used in a real Czochralski crystal growth lab included a graphite crucible, heat shield, heating device, thermal insulation and chamber including two gas outlets. We have considered two cases for calculations, which are configur...

outflow Boundary Codition Issues in Direct Numerical Simulation of Three- Dimensional Plane Wake Flow

Experimental study and numerical simulation of three dimensional two phase impinging jet flow using anisotropic turbulence model

Hydrodynamic of a turbulent impinging jet on a flat plate has been studied experimentally and numerically. Experiments were conducted for the Reynolds number range of 72000 to 102000 and a fixed jet-to-plate dimensionless distance of H/d=3.5. Based on the experimental setup, a multi-phase numerical model was simulated to predict flow properties of impinging jets using two turbulent models. Mesh...