Analysis of the alkali-activated fly ashes from electrostatic precipitators by impedance measurements

Activated carbons from oil-fired fly ashes

Introduction. The aim of this investigation is to prepare activated carbons with good sorbent characteristics from oil-fired fly ash, looking for suitable activation processes to produce surface sites with high reactivity on the carbonaceous matrices [1-4]. In particular, the nitrogen surface sites, formed by gaseous ammonia reaction at 800°C, could greatly increase the adsorption of gaseous sp...

The Preparation of Silicon and Aluminum Extracts from Tuncbilek and Orhaneli Fly Ashes by Alkali Fusion

Coal fly ash is formed as a solid waste product from the combustion of coal in coal fired power stations. Huge amounts of fly ash are produced globally every year and are predicted to increase. Nowadays, less than half of the fly ash is used as a raw material for cement manufacturing, construction and the rest of it is disposed as a waste causing yet another environmental concern. For this reas...

PROPERTIES OF ALKALI-ACTIVATED FLY ASH CONCRETE BLENDED WITH SLAG

Next Generation Wet Electrostatic Precipitators

Multi-pollutant control technologies will become more important in the future. This new membrane wet electrostatic precipitator (WESP) system is ideally suited to, and very cost effective for, removing PM2.5, SO3 and Hg after limestone wet flue gas desulphurization (WFGD) scrubbers in the utility industry. Several coal-fired utilities have been experiencing increased SO3 emissions from their ex...

ALKALI Activated FLY-ASH Based Geopolymer Concrete

Considering the increasing demand for developing alternative construction materials, due to the growing environmental concerns, this paper discusses the feasibility of alkali activated geo-polymer concrete, as a future construction material. The main objective of this study involves observation of structural behaviours of the fresh fly ash-based geo-polymer concrete, understanding the basic mix...