Analysis of Surface Roughness of Cold Roll-Beating Tooth
نویسندگان
چکیده
منابع مشابه
Investigation of the mechanical properties of cold roll welded Brass and IF steelproduced by cold roll bonding process
Cold roll bonding (CRB) is a solid state welding process, where the bonding is established by compressive plastic deformation of the metals. This process is applicable for a large number of materials. In addition, materials that cannot be bonded by traditional fusion-based processesmight be bonded by CRB process. In this research, cold roll welding of brass and IF steel was studied .The effects...
متن کاملStress Analysis and Energy Estimation in Cold-Roll Forming Process
In this article, stress analysis and energy estimation during cold-roll forming of symmetrical channel sections have been discussed. Geometry of sheet strip is pre-estimated by a shape function. Then longitudinal, transversal and shear strains have been calculated. Using both the Levy-Mises and the Prandtl Reuss equations, and also considering the Bauschinger effect, stress distributions have b...
متن کاملSurface Roughness of Restorative Materials after Tooth Whitening
Thisin vitro study was conducted to evaluate the effect of tooth whitening on the surface roughness of dental restorative materials using AFM. Two hybrid resin composites and nano-ionomer were fabricated in samples with 2 mm thickness and 6 mm diameter. No changes in roughness was observed for all three materials tested after 14 days of bleaching with 20% carbamide peroxide (CP), compared to th...
متن کاملwoman-defined identity: analysis of selected poems of adrienne rich
the current thesis is composed in five chapters in the following fashion: chapter two encompasses the applied framework of the project in details; the methodology of carl gustav jung to explain the process of individuation, the major archetypes and their attributes and his techniques to assess the mind’s strata are all explained. moreover, the austrian psychoanalysts, heinz kohut’s models of a...
Determination of Buckling Limit of Strain in Cold Roll Forming through Finite Element Analysis
In this study, "Buckling Limit of Strain" (B.L.S.) is introduced as one of the most important limiting factors in cold roll forming process. B.L.S. is calculated by the finite element procedure. Then for two particular processes with existing analysis and experimental results, B.L.S. has been determined and evaluated. LUSAS 12.3 is used for finite element analysis. The results show that when bu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2018
ISSN: 1757-899X
DOI: 10.1088/1757-899x/452/4/042143