Analysis of reducing pressure and increasing injection in high pressure water injection block of low permeability reservoir
نویسندگان
چکیده
The plugging phenomenon near the well zone of oil injection will seriously affect water development field, and then exploitation resources. low permeability reservoir is affected by various factors. Due to large difference between layers serious interference layers, physical property layer relatively poor, pressure shows a trend increasing year year, which has great impact on As oilfield benefit not ideal, it necessary take reasonable measures reduce ensure effect improve recovery reservoir. At present, technology been mature, can rate. application in several Wells verified correctness this conclusion.
منابع مشابه
consequence analysis of the leakage, ignition and explosion during high pressure sour gas injection process to the oil reservoir
there is no doubt that human being needs to become integrated with industry and industry needs to be progressed, daily. on the other hand, serious events in industrial units specially in oil industries has been shown that such damages and events are industry related ones. the consequence of such events and damages which resulted in chemical and poisoned explosions and loss of life and property ...
High-pressure water injection injury
Patients that present with high-pressure injection injuries most often have hand or digital involvement. Overall, highpressure injection injuries to the hand are uncommon and tend to be occupation related. The usual cause is industrial equipment, with machinery such as grease guns, spray guns and diesel engine injectors accounting for most of these injuries. Materials injected include the follo...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Optimization of Low Pressure Vortex Tube via Different Axial Angles of Injection Nozzles
In this article, a Ranque–Hilsch Vortex Tube has been optimized utilizing axial angles for nozzles. Effect of nozzles angles on the flow behavior has been investigated by computational fluid dynamics (CFD) techniques. A finite volume approach with the standard k–ε turbulence model has been used to carry out all the computations. The dimensions of studied vortex tubes are kept the same for all m...
متن کاملHigh-Pressure Injection to the Great Toe with River Water.
CASE A 53-year-old male sustained a high-pressure water injection injury to his foot while working in a river. He was taken to the operating room for emergent irrigation and debridement of copious riverbed sediment. Cultures taken from the operating room were positive for multiple anaerobes, fungus and mold and he was treated with appropriate antibiotics. To date, his only residual deficit is a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: E3S web of conferences
سال: 2022
ISSN: ['2555-0403', '2267-1242']
DOI: https://doi.org/10.1051/e3sconf/202235802028