Analysis of pressure distribution for free molecule flow in circular tube.
نویسندگان
چکیده
منابع مشابه
Flow Visualization Around a Non - Circular Tube
The flow behavior around a cam shaped tube in cross flow has been investigated experimentally using flow visualization and pressure distribution measurement. The range of attack angle and Reynolds number based on an equivalent circular diameter are within 0 ≤ α ≤ 360˚ and 2 x 104 < Reeq < 3.4 x 104, respectively. The pressure drag features are clarified in relation to the flow behavior around t...
متن کاملA CLOSED FORM SOLUTION FOR FREE VIBRATION ANALYSIS OF TUBE-IN-TUBE SYSTEMS IN TALL BUILDINGS
In this paper the dynamic response of tube-in-tube systems for tall building structures is investigated. Inner and outer tubes are modeled using equivalent continuous orthotropic membranes; in which, each tube is individually modeled by a cantilever box beam. By applying the compatibility conditions on deformation of the two tubes, the governing dynamic equations of the tube-in-tube structure a...
متن کاملAnalysis of pressure distribution and optimization of working conditions during push bending of circular tubes
Thin-walled tube bending is still to be considered a new and advanced technique. The process has been adopted into several industries such as aero and automotive. This process may produce a wrinkling, bulking and tearing phenomenon if the process parameters are inappropriate, especially for tubes with large diameter and thin wall thickness. Push bending process is one of the methods used for be...
متن کاملNumerical Analysis of the Effect of Sinusoidal Pressure Path on Thinning of Tube in Hot Metal Free Bulging Process
Light-weight and high strength alloys such as Al-Mg alloys are used in order to reduce the weight of industrial components. However these materials should be formed at elevated temperatures due to their poor formability at room temperature. Hot metal gas forming is one of the high-tech forming processes that is used to solve this problem. Recent investigation on tube hydroforming showed positiv...
متن کاملNumerical Analysis of the Effect of Sinusoidal Pressure Path on Thinning of Tube in Hot Metal Free Bulging Process
Light-weight and high strength alloys such as Al-Mg alloys are used in order to reduce the weight of industrial components. However these materials should be formed at elevated temperatures due to their poor formability at room temperature. Hot metal gas forming is one of the high-tech forming processes that is used to solve this problem. Recent investigation on tube hydroforming showed positiv...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JOURNAL OF CHEMICAL ENGINEERING OF JAPAN
سال: 1977
ISSN: 0021-9592,1881-1299
DOI: 10.1252/jcej.10.104