Analysis of oxy-fuel combustion power cycle utilizing a pressurized coal combustor

Enthalpy Calculation for Pressurized Oxy-coal Combustion

Oxy-fuel combustion is recognized one of the most promising available technologies that zero emission accomplishment may be in the offing. With coal burned under the pressure of 6MPa and oxygenenriched conditions, the high temperature and high pressure gaseous combustion product is composed of 95% CO2 and water-vapor, with the rest of O2, N2 and so on. However, once lauded as classic approach o...

Oxy - fuel combustion of coal and biomass blends

The ignition temperature, burnout and NO emissions of blends of a semi-anthracite and a high-volatile bituminous coal with 10 and 20 wt.% of olive waste were studied under oxy-fuel combustion conditions in an entrained flow reactor (EFR). The results obtained under several oxy-fuel atmospheres (21%O2-79%CO2, 30%O2-70% CO2 and 35%O265%CO2) were compared with those attained in air. The results in...

Oxy-coal Combustion Studies

Process Integration in Coal based Oxy-Combustion Power Plants

The oxy-combustion technology is ready for demonstration [1]. However, the energy penalty and investment cost related to CO2 capture are still too high to implement this technology in the power industry. The thermal efficiency penalty is currently around 10% points, and as discussed in [2] it is commonly expected to be reduced to below 6% points in the near future. Improvements on the sub-units...

Effects of nitrogen content in fuel on NOX emissions under oxy-fuel coal combustion

Oxy-fuel coal combustion with flue gas re-circulation is known to be one of the most promising methods for reducing CO2 emissions from coal combustion power plants. In the oxy-fuel system, the combustion atmosphere consists of only O2 separated from air and flue gas re-circulated from a stack. Therefore, the flue gas is dominated by CO2 without any nitrogen gas. The most attractive potential as...