Analysis of Mold Overall Deformation and Contact Stress During Biomass Cold Compression Molding
نویسندگان
چکیده
منابع مشابه
The Numerical Analysis and Validation of Compression Molding Process
In this work, the simulation results from a program developed for the three-dimensional analysis of compression molding of thermoset composites were compared to the experimental results of an actual molded thermoset sample. The program predicts the flow pattern, fiber orientation, fiber length distribution, curing of the resin and mechanical properties. The comparison between simulation and exp...
متن کاملconsequence analysis of the leakage, ignition and explosion during high pressure sour gas injection process to the oil reservoir
there is no doubt that human being needs to become integrated with industry and industry needs to be progressed, daily. on the other hand, serious events in industrial units specially in oil industries has been shown that such damages and events are industry related ones. the consequence of such events and damages which resulted in chemical and poisoned explosions and loss of life and property ...
Stress Analysis and Energy Estimation in Cold-Roll Forming Process
In this article, stress analysis and energy estimation during cold-roll forming of symmetrical channel sections have been discussed. Geometry of sheet strip is pre-estimated by a shape function. Then longitudinal, transversal and shear strains have been calculated. Using both the Levy-Mises and the Prandtl Reuss equations, and also considering the Bauschinger effect, stress distributions have b...
متن کاملStress Analysis and Energy Estimation in Cold-Roll Forming Process
In this article, stress analysis and energy estimation during cold-roll forming of symmetrical channel sections have been discussed. Geometry of sheet strip is pre-estimated by a shape function. Then longitudinal, transversal and shear strains have been calculated. Using both the Levy-Mises and the Prandtl Reuss equations, and also considering the Bauschinger effect, stress distributions have b...
متن کاملStudy on the Mold Temperature Control for the Core Plate during Injection Molding Process
Abstract: During injection molding process, the mold temperature is one of the most important influences on the product quality. In this paper, the temperature of the core plate with the size of 100 mm × 100 m × 40 mm will be examined for different product sizes. Different types of heating and cooling channels are inserted in the core plate. The size of the plastic product will be changed from ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: DEStech Transactions on Materials Science and Engineering
سال: 2017
ISSN: 2572-889X
DOI: 10.12783/dtmse/icmsea/mce2017/10873