Analysis of microstructure eutectic Tb3Sc2Al3O12-TbScO3 photonic properties
نویسندگان
چکیده
منابع مشابه
Mesostructured AgCl–KCl Eutectic Photonic Crystals
Dr. J. Kim, Dr. J. H. Choi, Dr. J. Choi, H. S. Kim, Dr. J. Liu, Prof. C.-R. Cho, J. G. Kang, Prof. P. V. Braun Department of Materials Science and Engineering Frederick Seitz Materials Research Laboratory University of Illinois at Urbana-Champaign Urbana , IL 61801 , USA E-mail: [email protected] Dr. L. K. Aagesen, Dr. A. Ramazani, Prof. K. Thornton Department of Materials Science and Enginee...
متن کاملEffects of a Third Element on Microstructure and Mechanical Properties of Eutectic Sn–Bi Solder
The effects of a third element, namely silver, copper, zinc, or antimony, on the microstructure and mechanical properties of eutectic tin-bismuth (Sn–Bi) solder were investigated. The investigation showed that, except for zinc, the addition of a trace amount of the third element improves the ductility of the Sn–Bi solder owing to the formation of a fine, homogeneous ternary eutectic microstruct...
متن کاملEffect of Y Addition on the Microstructure and Mechanical Properties of Sn-Zn Eutectic Alloy
The effect of Yttrium addition on the microstructure and mechanical properties of Sn-Zn eutectic alloy, which has been attracting intensive focus as a Pb-free solder material, was investigated in this study. Phase equilibrium has been calculated by using FactSage® to evaluate the composition and fraction of equilibrium intermetallic compounds and construct a phase diagram. In the case of Sn-8.8...
متن کاملThe Pseudo-Eutectic Microstructure and Enhanced Properties in Laser-Cladded Hypereutectic Ti–20%Si Coatings
Ti5Si3 is an attractive light weight reinforcement phase in hypereutectic Ti–Si-based alloys, however, the proeutectic Ti5Si3 phase is brittle and is easily coarsened when the alloy is prepared under normal solidification conditions, thereby limiting its engineering applications in the aviation and biological industries. In this study, a hypereutectic Ti–20%Si coating with a pseudo-eutectic α-T...
متن کاملInfluence of Ag micro-particle additions on the microstructure, hardness and tensile properties of Sn-9Zn binary eutectic solder alloy
In this study, an addition of Ag micro-particles (8–10 lm) with a content in the range between 0 and 1.5 wt.% to Sn–9Zn eutectic solder, were examined in order to understand the effect of Ag additions as the particulate reinforcement on the microstructural and mechanical properties as well as the thermal behavior of the newly developed composite solders. Here, an approach to prepare a micro-com...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Photonics Letters of Poland
سال: 2011
ISSN: 2080-2242
DOI: 10.4302/plp.2011.3.09