Analysis of Grain Colonies in Type 430 Ferritic Stainless Steels by Electron Back Scattering Diffraction (EBSD).
نویسندگان
چکیده
منابع مشابه
Quantification of ridging in ferritic stainless steel sheets by electron backscattered diffraction R-value maps.
In ferritic stainless steel (FSS), undesirable surface defects of ridging appear during deep drawing. The formation of these defects is attributed to the inhomogeneous distribution of orientations of individual grains. In the present work, a new electron backscattered diffraction R(α)-value map was introduced, and the dependence of the tensile directions on the formation of ridging in an FSS sh...
متن کاملThermal Fatigue Behavior of 400 Series Ferritic Stainless Steels
In this study, thermal fatigue properties of 400 series ferritic stainless steels have been evaluated in the temperature ranges of 200-800C and 200-900C. Systematic methods for control of temperatures within the predetermined range and measurement of load applied to specimens as a function of temperature during thermal cycles have been established. Thermal fatigue tests were conducted under ful...
متن کاملHigh-Alloy Ferritic Steels: Martensitic Stainless Steels, Precipitation Hardening (code 1810)
This report may be updated and revised periodically in response to the needs of the technical community; up-to-date versions can be requested from the editors at the address given below or downloaded at http://www.ca.sandia.gov/matlsTechRef/. The content of this report will also be incorporated into a Sandia National Laboratory report (SAND2008-1163); the most recent version can be obtained fro...
متن کاملDevelopment of Recrystallization Textures in Deep-Drawing Steels, Measured by X-Ray Diffraction and EBSD
The development of recrystallization textures in two low carbon steels used for deep drawing has been investigated through measurements of global textures (by X-Ray diffraction) and local orientations (by EBSD, Electron Back Scattering Diffraction). The global measurements allow a quantitative description of the recrystallization textures whereas the local measurements allow to identify some of...
متن کاملType IV cracking in ferritic power plant steels
There have been concerted world wide efforts to develop steels suitable for use in efficient fossil fired power plants. Ferritic alloys containing between 9 and 12 wt-% chromium are seen as the most promising materials in this respect, especially for thick walled components such as headers and the main steam pipe in boilers. However, the performance of the improved steels has often not been rea...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 1997
ISSN: 0915-1559
DOI: 10.2355/isijinternational.37.872