Analysis of Encased Steel Beams with Hollow Cross-Sections
نویسندگان
چکیده
منابع مشابه
Research into Filler-beam Deck Bridges with Encased Beams of Various Sections
Load-bearing structures of deck railway bridges with encased filler beams have been used for short and middle spans of a maximum of 24 metres. For over a hundred years they have been designed in cases with little headroom. The first bridges were constructed with no interaction between steel beams and concrete floor slabs, the structural steel working as a bearing element and the concrete in the...
متن کاملFlexural Performance of High-strength Prestressed Concrete-encased Concrete-filled Steel Tube Sections
The sections composed of concrete and steel, which include concrete-encased concrete-filled tubes, generally have defects due to the low tensile strength of concrete. Therefore, an appropriate method was used for the combination of concrete-filled tubes (CFT) and prestressing strands which is encased in concrete. The conventional design guidelines are commonly developed for materials with norma...
متن کاملGeometrically Nonlinear Theory of Composite Beams with Deformable Cross Sections
Aone-dimensional theory of slender structures with heterogeneous anisotropic material distribution is presented. It expands Cosserat’s description of beam kinematics by allowing deformation of the beam cross sections. For that purpose, a Ritz approximation is introduced on the cross-sectional displacement field, which defines additional elastic degrees of freedom (finite-sectionmodes) in the on...
متن کاملCollimation with hollow electron beams.
A novel concept of controlled halo removal for intense high-energy beams in storage rings and colliders is presented. It is based on the interaction of the circulating beam with a 5-keV, magnetically confined, pulsed hollow electron beam in a 2-m-long section of the ring. The electrons enclose the circulating beam, kicking halo particles transversely and leaving the beam core unperturbed. By ac...
متن کاملBending Fatigue Tests and Finite Element Models of Steel Rectangular Hollow Sections [SRHS]
The Welding in cold formed areas is not only an open question for statically loaded sections (brittle fracture) but also for dynamically loaded structures (fatigue resistance). A lot of structures are subjected to dynamic loadings and unfortunately very little information about the influence of welding in the cold formed areas on fatigue resistance is available. In order to establish the fatigu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Engineering
سال: 2012
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2012.07.084