�Analysis of different shaped footing under soft soil condition�
نویسندگان
چکیده
منابع مشابه
Intrusion of Geomesh in Gypseous Soil Under Single Footing
Methods to improve bearing capacity of footing resting of collapsing soil can, in fact, take two approaches, improving soil strength properties and intrusion of reinforcing sorces into soil. The footing is modeled by a square steel plate 0.1 by 0.1 m. The footing is loaded as to have a stress of 40 kPa and settlement is receded in dry and in soaking conditions. Two depths of the geo-mesh reinfo...
متن کاملAdsorption of arsenic on soil under different soil moisture conditions
The adsorption study was conducted on three Japanese soils with different soil properties to characterize the adsorption pattern of Arsenic (As). Double tube method was used to find out the effect of soil moisture levels on As adsorption. For this study, besides double tube method, conventional batch method also was used. The As adsorption showed two phase kinetics. An initial and rapid adsorpt...
متن کاملAdsorption of arsenic on soil under different soil moisture conditions
The adsorption study was conducted on three Japanese soils with different soil properties to characterize the adsorption pattern of Arsenic (As). Double tube method was used to find out the effect of soil moisture levels on As adsorption. For this study, besides double tube method, conventional batch method also was used. The As adsorption showed two phase kinetics. An initial and rapid adsorpt...
متن کاملInvestigation of Auto Ignition Condition under Different Parameters
In this work, the potential of auto-ignition of heavy oil during in-situ combustion (ISC) process was studied. Kinetic studies were carried out using Thermo Gravimetric Analyzer (TGA), Differential Scanning Calorimetry (DSC) and Accelerating Rate Calorimetric (ARC) techniques. Effects of oxygen partial pressure, reservoir pressure and clay on auto ignition condition were investigated on a n...
متن کاملBending-Unbending Analysis of Anisotropic Sheet under Plane Strain Condition
The mechanical behavior of cold rolled sheets is significantly related to residual stresses that arise from bending and unbending processes. Measurement of residual stresses is mostly limited to surface measurement techniques. Experimental determination of stress variation through thickness is difficult and time-consuming. This paper presents a closed form solution for residual stresses, in whi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal for Research in Applied Science and Engineering Technology
سال: 2019
ISSN: 2321-9653
DOI: 10.22214/ijraset.2019.3161