Analysis of Cutting Temperature and Heat Flow Rate into Workpiece in Ordinary Metal Cutting.
نویسندگان
چکیده
منابع مشابه
Cutting Tool Temperature Analysis in Heat-Pipe Assisted Composite Machining
Machining of advanced materials, such as composite, encounters high cutting temperatures and rapid tool wear because of the abrasive nature of the reinforcement phases in the workpiece materials. Ultrahard coatings, such as chemical vapor deposition diamond, have been used for machining such advanced materials. Wear of diamond-coated tools is characterized by catastrophic coating failure, plaus...
متن کاملThe Effect of Power and Maximum Cutting Speed on the Material Removal Rate and Cutting Volume Efficiency in CO2 Laser Cutting of Polycarbonate Sheets
In the laser cutting process some well-known parameters, e.g. laser power and cutting speed, play major roles in the performance of the process. Each parameter or a combination of parameters can affect the material removal volume and cutting volume efficiency. The purpose of this research is to study the effect of power and maximum cutting speed on the material removal rate (MRR) and cutting vo...
متن کاملExperimental Study of the Effect of Laser-Cutting Process Parameters on Heat Distribution and Cutting Edge Quality of Steel Sheets
This study aimed to evaluate Laser-cutting process of Mild Steel St37 sheets with two different thicknesses. In order to evaluate the quality of cutting edge and the depth of the area affected by the heat, several tests were conducted to determine the effect of parameters such as Laser power, Laser beam movement speed and pressure of axillary gas on the quality of cutting edge and the depth of ...
متن کاملAnalysis of Orthogonal Metal Cutting Processes
The orthogonal metal cutting process for a controlled contact tool is simulated using a limit analysis theorem. The basic principles are stated in the form of a primal optimization problem with an objective function subjected to constraints of the equilibrium equation, its static boundary conditions and a constitutive inequality. An Eulerian reference co-ordinate is used to describe the steady ...
متن کاملDetermination of workpiece flow stress and friction at the chip–tool contact for high-speed cutting
This paper presents a methodology to determine simultaneously (a) the flow stress at high deformation rates and temperatures that are encountered in the cutting zone, and (b) the friction at the chip–tool interface. This information is necessary to simulate high-speed machining using FEM based programs. A flow stress model based on process dependent parameters such as strain, strain-rate and te...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
سال: 1996
ISSN: 0387-5024,1884-8354
DOI: 10.1299/kikaic.62.3712