Analysis of CNC machine tool volumetric and rotary axis centre positional errors
نویسندگان
چکیده
منابع مشابه
Adjustment and Compensation Techniques for the Rotary Axes of Five-axis CNC Machine Tools
Five-axis computer numerical control (CNC) machine tools (three linear and two rotary axes) are ideally suited to the fabrication of complex work pieces, such as dies, turbo blades, and cams. The locations of the axis average line and centerline of the rotary axes strongly influence the performance of these machines; however, techniques to compensate for eccentric error in the rotary axes remai...
متن کاملMeasurement and Compensation for Volumetric Positioning Errors of CNC Machine Tools Considering Thermal Effect
The measurement and compensation of volumetric positioning errors can greatly improve the accuracy of the machine tools. In this paper, a sequential step diagonal measurement is introduced to calibrate 9 volumetric positioning errors in a quick way. Measurements under various thermal conditions are preformed to understand the relationship between the volumetric positioning errors and the temper...
متن کاملA generalized on-line estimation and control of five-axis contouring errors of CNC machine tools
Nonlinear and configuration-dependent five-axis kinematics make contouring errors difficult to estimate and control in real time. This paper proposes a generalized method for the on-line estimation and control of five-axis contouring errors. First, a generalized Jacobian function is derived based on screw theory in order to synchronize the motions of linear and rotary drives. The contouring err...
متن کاملRemote Servo Tuning System for Multi-Axis CNC Machine Tools Using a Virtual Machine Tool Approach
Servo systems affect the performances of machining in accuracy and surface quality for high speed and precision machine tools. This study introduces an efficient servo tuning technique for Computer Numerical Control (CNC) feed drive systems using particle swarm optimization (PSO) algorithm by virtual machine tool approach. The proposed approach contained a system identification phase and a serv...
متن کاملOptimization of Spindle loading and Tool Wear for CNC Turning Machine by Using Intelligent System
Intelligent knowledge based system (IKBS) is developed for optimizing dry CNC turning process using Taguchi method, CNC Machine, EN19 steel as the work piece material, andCutting Insert. Tool wear and spindle loading which are the machining parameters, spindle speed, feed rate, and depth of cut, areoptimized through the intelligent knowledge based system (IKBS). The experimental CNC turning mac...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Mechanik
سال: 2015
ISSN: 0025-6552
DOI: 10.17814/mechanik.2015.3.128