Analysis for Cooling Process of Arc Welding

Visual Sensing Systems for Arc Welding Process

Visual sensing technology is widely used in welding practices because visual devices are decreasing in price, increasing in reliability and improving in image processing hardware and software. As the most studied welding sensor, CCD(Charge Coupled Device) is more suitable for quality control of welding process than other means of sensing devices because it can obtain both two dimensional and th...

Thermaltransport Phenomenon of Submerged Arc Welding Process

Original scientific paper In present work, thermal transport considering heat radiation by oval heat source shape and heat transfer of molten moving electrode was presented. In present paper, an analytical solution was presented by aggregating temperature increments caused by applying liquid metal and heat radiation of moving electrode. The assumptions for the study were heat source of temperat...

Monitoring of Arc Welding Process Based on Arc Light Emission

Keyhole Double-sided Arc Welding Process for Deep Narrow Penetration

In regular arc welding, the arc heat is transferred from the surface of the workpiece to melt it. In keyhole plasma arc welding, the workpiece is melted by the plasma jet which heats the wall of the keyhole along the thickness direction. Penetration is achieved with reduced heat input. However, the plasma jet only gains its energy in the arc before reaching the keyhole. In the keyhole where no ...

Arc welding Control for Shaped Metal Deposition Process

This paper is focused on the study and the control of a deposition process of robotic arc welding. The process consists of a SMD (Shaped Metal Deposition) system, that is a novel rapid prototyping tungsten inert gas (TIG) welding technique leading to near-net-shape, using a layer by layer deposition technique. An experimental setup has been properly implemented in order to study the system and ...