Analysis and Optimization of Process Parameters in Abrasive Waterjet Contour Cutting of AISI 304L

نویسندگان

چکیده

Abrasive waterjet machining is applied in various industries for contour cutting of heat-sensitive and difficult-to-cut materials like austenitic stainless steel 304L, with the goal ensuring high surface integrity efficiency. In alignment this manufacturing aspiration, experimental analysis optimization were carried out on abrasive 304L objectives minimizing roughness maximizing material removal rate. process, process parameters are critical factors influencing performance. Accordingly, Taguchi’s S/N ratio method has been used study parameters. Further work, impacts input investigated, including pressure, mass flow rate, traverse speed thickness rate roughness. The reveals that an increasing level pressure achieved better higher values. average results indicate optimum value at 300 MPa 500 g/min minimum maximum It was also found optimized a 90 mm/min generates lowest 150 produces highest removed. Moreover, variance showed most parameter percentage contribution ranging 90.72–97.74% 65.55–78.17%, respectively.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Modeling and Optimization of Abrasive Waterjet Parameters using Regression Analysis

Abrasive waterjet is a novel machining process capable of processing wide range of hard-to-machine materials. This research addresses modeling and optimization of the process parameters for this machining technique. To model the process a set of experimental data has been used to evaluate the effects of various parameter settings in cutting 6063-T6 aluminum alloy. The process variables consider...

متن کامل

Optimization of Abrasive Waterjet Machining Process Parameters Using Orthogonal Array with Grey Relational Analysis

In the present work, the optimization of the abrasive water jet machining (AWJM) process parameters with multiple performance characteristics based on the orthogonal array with the grey relational analysis (GRA) has been studied. Optimization of multiple response characteristics is far more complex compared to optimization of single performance characteristic. A grey relational grade (GRG) calc...

متن کامل

Influence of Process Parameters on Surface Roughness in Abrasive Waterjet Cutting of Titanium

Abrasive waterjet cutting is one of the nontraditional machining processes capable of cutting wide range of hard-to-cut materials. This process incurs relatively higher initial investment, maintenance and operating costs. Therefore optimum choice of the process parameters is essential for the economic, efficient and effective utilization of this process. This paper assesses the influence of pro...

متن کامل

Surface Texture in Abrasive Waterjet Cutting

When cutting thick material with an abrasive wateriet, the surface area can be characterized by two texture types. At the top of the cut, the surface texture is smooth. At the bottom, the slurry jet exiting the workpiece forms large striations in the surface. An investigation was conducted to experimentafly determine the influence of the abrasive waterjet cutting parameters on surface texture. ...

متن کامل

Monitoring of Focusing Tube Wear during Abrasive Waterjet (awj) Cutting of Aisi

P. Hreha, A. Radvanská, J. Cárach, D. Lehocká, K. Monková, S. Hloch Faculty of Manufacturing Technologies, with a seat in Prešov, Prešov, Slovak Republic; S. Hloch Intitute of Geonics Academy of Science v.v.i. Ostrava – Poruba, Czech Republic; G. Krolczyk Faculty of Production Engineering and Logistics, Opole University of Technology, Poland; A. Ruggiero Department of Industrial Engineering, Un...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Metals

سال: 2021

ISSN: ['2075-4701']

DOI: https://doi.org/10.3390/met11091362