Analysis and optimization of gel-cast ceramic foam diesel particulate filter performance
نویسندگان
چکیده
منابع مشابه
Combining the Classical and Lumped Diesel Particulate Filter Models
The growing presence of Spark Ignition Direct Injection (SIDI) engines along with the prevalence of direct injected Compression Ignition (CI) engines results in the requirement of Particulate Matter (PM) exhaust abatement. This occurs through the implementation of Gasoline Particulate Filters (GPFs) and Diesel Particulate Filters (DPFs). Modeling of GPFs and DPFs are analogous because of the si...
متن کاملEffect of Biodiesel Blends on Diesel Particulate Filter Performance; SAE Paper No. 2006-01-3280
Tests of ultra-low sulfur diesel blended with soy-biodiesel at 5% and 20% were conducted using a 2002 model year Cummins ISB engine (with exhaust gas recirculation) that had been retrofitted with a passively regenerated catalyzed diesel particulate filter (DPF). Results show that on average, the DPF balance point temperature (BPT) is 45°C and 112°C lower for B20 blends and neat biodiesel, respe...
متن کاملFatigue Analysis and Optimization of Crankshaft of V8 Diesel Engine
The crankshaft is one of the most critically loaded components as it experiences cyclic loads in the form of bending and torsion during its service life. Its failure will cause serious damage to the engine so it’s important at the time of design to verify fatigue strength. More challenges in crankshaft design due to increasing vehicle payloads, lower weight requirement, higher efficiency and lo...
متن کاملMicroscopy Investigations of Ash and Particulate Matter Accumulation in Diesel Particulate Filter Surface Pores
There has been increased focus on the environmental impact of automobile emissions in recent years. These environmental concerns have resulted in the creation of more stringent particulate matter emissions regulations in the United States and European Union. These limits have forced diesel engine manufacturers to reduce particulate matter (PM) emissions by an order of magnitude beginning in 200...
متن کاملLoading and Regeneration Analysis of a Diesel Particulate Filter with a Radio Frequency-Based Sensor
Accurate knowledge of diesel particulate filter (DPF) loading is critical for robust and efficient operation of the combined engine-exhaust aftertreatment system. Furthermore, upcoming on-board diagnostics regulations require on-board technologies to evaluate the status of the DPF. This work describes the application of radio frequency (RF) – based sensing techniques to accurately measure DPF s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
سال: 2008
ISSN: 0954-4070,2041-2991
DOI: 10.1243/09544070jauto840