Analysis and Compensation Control of Engine Valve Response Delay Based on the Electro-Hydraulic Variable Valve Actuator
نویسندگان
چکیده
The time delay of variable valve actuators has a significant influence on engine lift tracking performance. For camless hydraulic actuators, response is affected by many factors, such as friction and control response. In this paper, investigated in depth. Experiment results show that motion can be divided into open close delay. They are different even the same cycle. Complicated characteristics make it difficult to build an accurate model. data-based observer developed. To compensate nonlinear delay, virtual desired designed. By synthesizing backstepping procedure, controller with compensation Compared P controller, improved performance significantly. experiment error reduced 18.33% 4% at least both stable conditions transient conditions. At conditions, not more than 0.39 °CA, 0.44 °CA.
منابع مشابه
Research on Variable Domain Electro - hydraulic Proportional Valve Control Technology
As the control system of the ship's crane is nonlinear , time-varying and large inertia, the traditional way to control is difficult to achieve control requirements. The text have the deck crane’ electro-hydraulic proportional valve as the research object, use the way of optimizing input’s fuzzy domain which called variable domain fuzzy PID, to solve the weakness of traditional control and brin...
متن کاملDesign and Performance Evaluation of an Electro-Hydraulic Camless Engine Valve Actuator for Future Vehicle Applications
This paper details the new design and dynamic simulation of an electro-hydraulic camless engine valve actuator (EH-CEVA) and experimental verification with lift position sensors. In general, camless engine technologies have been known for improving fuel efficiency, enhancing power output, and reducing emissions of internal combustion engines. Electro-hydraulic valve actuators are used to elimin...
متن کاملElectro-hydraulic Servo Valve Systems
Hydraulic systems driven by servo valves provide highly accurate control over enormous forces. A servo valve system consists of a transducer, a servo amplifier, a servo valve, and an actuator with a connected load. It is a closed-loop system used for the precise control of the output (load) parameter, such as position, velocity, or force, in response to a command signal. The output is converted...
متن کاملFailure analysis of an intake valve in a gasoline engine
This paper presents a failure analysis on a failed intake valve in a gasoline engine. During an endurance test, an intake valve was broken and caused some damages on the piston. Material examinations (by a light microscope and also a scanning electron microscope) were conducted on the fracture surface of the intake valve shaft. Results showed that no pores or defects could be observed and the m...
متن کاملFeed Forward Linear Quadratic Controller Design for an Industrial Electro Hydraulic Actuator System with Servo Valve
Electro-hydraulic servo actuator (EHA) system consists of several dynamic parts which are widely used in motion control application. These dynamic parts need to be controlled to determine direction of the motion. In this research paper, system identification technique is used for system modeling and the model of the system is estimated by using parameter estimation technique. This process start...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Machines
سال: 2022
ISSN: ['2075-1702']
DOI: https://doi.org/10.3390/machines10080701