Analysing trimethylaluminum infiltration into polymer brushes using a scalable area selective vapor phase process
نویسندگان
چکیده
This work identifies the critical factors when developing a polymer brush vapor phase infiltration process, while also demonstrating use of novel pyridines for area selective purposes.
منابع مشابه
A scalable fabrication process of polymer microneedles
While polymer microneedles may easily be fabricated by casting a solution in a mold, either centrifugation or vacuumizing is needed to pull the viscous polymer solution into the microholes of the mold. We report a novel process to fabricate polymer microneedles with a one-sided vacuum using a ceramic mold that is breathable but water impermeable. A polymer solution containing polyvinyl alcohol ...
متن کاملShear of polymer brushes
We have measured the normal, lateral and hydrodynamic forces that act between polymer-brush-bearing surfaces immersed in a good-solvent medium, both when stationary and when in motion with respect to each other. At low sliding velocities we find a very marked decrease in the frictional force between the surfaces, an effect interpreted in terms of a fluid interfacial layer resulting from the non...
متن کاملSrongly Charged Polymer Brushes
– Charged polymer brushes are layers of surface-tethered chains. Experimental systems are frequently strongly charged. Here we calculate phase diagrams for such brushes in terms of salt concentration ns, grafting density and polymer backbone charge density. Electrostatic stiffening and counterion condensation effects arise which are absent from weakly charged brushes. In various phases chains a...
متن کاملResponsive Polymer Brushes
The review focuses on responsive/switching behavior of polymer brushes. The structure of the polymer brushes is analyzed in terms of the constitution and conformation of polymer chains. Responsive properties are widely discussed based on phase transition mechanisms in a controlled environment when changes are induced by solvent quality, temperature, concentration of ions, and interactions with ...
متن کاملPoly-Electrolyte Polymer Brushes
It is shown using the mean field theory of Miklavic Marcelja that it should be possible for osmotic pressure due to the counterions associated with the two polyelectrolyte polymer brush coated surfaces (in the absence of excess salt) to support a reasonable load (i.e., about 105Pa)with the brushes held sufficiently far apart to prevent entanglement of polymers belonging to the two brushes, thus...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials advances
سال: 2021
ISSN: ['2633-5409']
DOI: https://doi.org/10.1039/d0ma00928h