Analyses of Different Adhesives on Pure Mode I and Mode II Delamination Growth of Composite Bonded Joints
نویسندگان
چکیده
منابع مشابه
Mixed-mode I/II Interlaminar Fracture of CF/PEI Composite Material
Failures in composite materials occur mainly due to interlaminar fracture, also called delamination, between laminates. This indicates that characterizing interlaminar fracture toughness is the most effective factor in the fracture of composite materials. This study reports investigation on mixed-mode interlaminar fracture behaviour in woven carbon fibre/polyetherimide (CF/PEI) thermoplastic co...
متن کاملThe Effect of Inclined U-Notch Geometry on Mode Ratio (KII/KI) under Mixed Mode (I + II) Loading
In inclined U-notches, the mixed mode (I + II) loading occurs and the mode ratio can be increased by varying the notch angle. In this paper, the effect of the inclined U-notch geometry, i.e. the notch depth, the notch angle, the notch root radius, and the position of the notch with respect to supports, on the mode ratio (KII/KI) have been studied. Three-point bending and plane strain condition ...
متن کاملEffect of Rock Fracture Filling on Mode I and II Fracture Toughness
This paper focuses on some fracture toughness tests performed on the pre-cracked Brazilian specimens of rock-like materials. Also the effect of rock fracture filling on the fracture toughness was considered experimentally. Fracture toughness is a key parameter for studying the crack propagation and fragmentation processes in rock structures. Fracture mechanics is an applicable tool to improve ...
متن کاملExperimental investigation of mode I fracture energy of adhesively bonded joints under impact loading conditions
Background Recently, the automotive industry has paid attention to multi-material structures to reduce CO2 emission. Hence, the use of light-weight and high-strength materials such as Al–Mg alloys, high-tensile-strength steel and carbon-fiber-reinforced plastics (CFRP) is essential to lighten the vehicle weight [1]. Joining methods for these dissimilar materials are the key to apply them into t...
متن کاملEffects of number of freeze-thaw cycles and freezing temperature on mode I and mode II fracture toughness of cement mortar
Natural and artificial materials including rocks and cement-based materials such as concrete and cement mortar are affected both physically and chemically by various natural factors known as weathering factors. The freeze-thaw process, as a weathering factor, considerably affects the properties of rocks and concrete. Therefore, the effect of the freeze-thaw process on the physical and mechanica...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Proceedings
سال: 2018
ISSN: 2504-3900
DOI: 10.3390/proceedings2231419