An Ultra-Wide-Band Tightly Coupled Dipole Reflectarray Antenna
نویسندگان
چکیده
منابع مشابه
FM wide band panel dipole antenna
It is very common that when a broadcaster needs to install an FM transmitting antenna within a large metropolitan area he places it on the tallest structure or building available. When the rooftop is already occupied by a large number of other types of transmitting and receiving antennas, the panel dipole antenna should be chosen. This antenna is secured to the side walls of the upper floors wi...
متن کاملAn Ultra Wide Band Antenna Design for Indoor Geolocation Applications
In this paper, we present a miniaturized, Ultra Wide Band (UWB) elliptical slot antenna with a circular stub as a tuning element printed on a FR4 substrate with a dielectric constant of 4.4 operating in the frequency range from 2 GHz up to 14 GHz over which the return loss below -10 dB. The antenna is intended to operate in a system designed to assist the visually impaired in indoor navigation ...
متن کاملReflectarray for K/ka-band Terminal Antenna
Different satellite systems have been defined to provide broadband communications and internet access in remote geographical areas in Ka band (20-30 GHz) [1-2], being the up-link at 30 GHz and the down-link at 20 GHz. Costeffective antennas are required for fixed and portable terminals in Ka-band. Conventional reflectors are a preferred option to maintain reduced costs. However, the different r...
متن کاملSlot Line Fed Dipole Antenna for Wide Band Applications
A slot line fed planar dipole antenna with a parasitic strip for wide band applications is presented. The presented antenna offers a 2:1 VSWR bandwidth from 1.66 to 2.71 GHz covering the DCS/ PCS/UMTS and IEEE 802.11b/g bands with a gain better than 6.5 dBi. The uniplanar design, simple feeding, and high gain make it a versatile antenna for wireless applications. © 2009 Wiley Periodicals, Inc. ...
متن کاملDesign of a CPW-Fed Ultra Wide Band Antenna
A CPW-fed ultra-wideband antenna was designed. The antenna was etched on a single-layer copper-cladding substrate, of which the material was FR4 with relative permittivity of 4.4, and the magnitude was 40.0 mm × 50.0 mm × 1.6 mm. The parameters of the antenna are simulated and optimized with HFSS. This paper proposes a new trapezoidal CPW-fed UWB antenna that the bandwidth (return loss ≤ −10 dB...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Antennas and Propagation
سال: 2018
ISSN: 0018-926X,1558-2221
DOI: 10.1109/tap.2017.2772311