An oriented-design simplified model for the efficiency of a flat plate solar air collector
نویسندگان
چکیده
منابع مشابه
investigating the feasibility of a proposed model for geometric design of deployable arch structures
deployable scissor type structures are composed of the so-called scissor-like elements (sles), which are connected to each other at an intermediate point through a pivotal connection and allow them to be folded into a compact bundle for storage or transport. several sles are connected to each other in order to form units with regular polygonal plan views. the sides and radii of the polygons are...
design, construction and evaluation of solar flat-plate collector simulator based on the thermohydraulic coefficient
introduction increasing the area of absorber plate between the flowed air through the duct can be accomplished by corrugating the absorber plate or by using the artificial roughness underside of the absorber plate as the commercial methods for enhancing the thermohydraulic performance of the flat plate solar air heaters. evaluation of this requires the construction of separated solar air heater...
متن کاملModeling of Flat-Plate Solar Collector Operation in Transient States
Saleh, Ahmad M. M.S.E., Purdue University, May 2012. Modeling Of Flat-Plate Solar Collector Operation in Transient States. Major Professor: Hosni Abu-Mulaweh. Solar energy is becoming an alternative for the limited fossil fuel resources. One of the simplest and most direct applications of this energy is the conversion of solar radiation into heat, which can be used in water heating systems. A c...
متن کاملTheoretical Model of a Flat Plate Solar Collector Integrated with Phase Change Material
Abstract—The objective of this work was to develop a theoretical model to study the dynamic thermal behavior of a flat plate solar collector integrated with a phase change material (PCM). The PCM acted as a heat source for the solar system during low intensity solar radiation and night. The energy balance equations for the various components of the collector as well as for the PCM were formulat...
متن کاملSensitivity Analysis of the Test Parameters of a Solar Flat Plate Collector for Performance Studies
The BIS test procedure for performance of solar flat plate collectors allows a certain limit of deviation for the control parameters to define the steady state condition. During actual performance studies, sometimes these limits are exceeded. In this paper an attempt has been made to find out the effect on the performance curve of the collector as a result of exceeding this prescribed limit by ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Thermal Engineering
سال: 2010
ISSN: 1359-4311
DOI: 10.1016/j.applthermaleng.2010.08.016