An optimization model for designing Acceptance Sampling Plan Based on Cumulative Count of Conforming Run Length Using Minimum Angle Method
نویسندگان
چکیده
منابع مشابه
An optimization model for designing Acceptance Sampling Plan Based on Cumulative Count of Conforming Run Length Using Minimum Angle Method
The purpose of this article is to present an acceptance sampling plan based on cumulative count of conforming using minimum angle method. In this plan, if the number of inspected items until rth defective items is greater than an upper control threshold then lot is accepted and if it is less than a lower control threshold then the lot is rejected and if it is between control thresholds, process...
متن کاملA New Optimization Model for Designing Acceptance Sampling Plan Based on Run Length of Conforming Items
The purpose of this article is to present an optimization model for designing an acceptance sampling plan based on cumulative sum of run length of conforming items. The objective is to minimize the total loss including both the producer and consumer losses. The concept of minimum angle method is applied to consider producer and consumer risks in the optimization model. Also the average number o...
متن کاملA New Acceptance Sampling Plan Based on Cumulative Sums of Conforming Run-Lengths
In this article, a novel acceptance-sampling plan is proposed to decide whether to accept or reject a receiving batch of items. In this plan, the items in the receiving batch are inspected until a nonconforming item is found. When the sum of two consecutive values of the number of conforming items between two successive nonconforming items falls underneath of a lower control threshold, the batc...
متن کاملA New Markov Chain Based Acceptance Sampling Policy via the Minimum Angle Method
We develop an optimization model based on Markovian approach to determine the optimum value of thresholds in a proposed acceptance sampling design. Consider an acceptance sampling plan where items are inspected and when the number of conforming items between successive defective items falls below a lower control threshold value, then the batch is rejected, and if it falls above a control thresh...
متن کاملDesigning a Single Stage Acceptance Sampling Plan Based on the Control Threshold Poli
In this research, a new control policy for the acceptance sampling problem is introduced. Decision is made based on the number of defectives items in an inspected batch. The objective of the model is to find a constant control level that minimizes the total costs, including the cost of rejecting the batch, the cost of inspection and the cost of defective items. The optimization is performed by...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Hacettepe Journal of Mathematics and Statistics
سال: 2014
ISSN: 1303-5010
DOI: 10.15672/hjms.2014327483