An Investigation on Microstructure, Texture and Mechanical Properties of AZ80 Mg Alloy Processed by Annular Channel Angular Extrusion
نویسندگان
چکیده
منابع مشابه
Wear Behavior and Microstructure of Mg-Sn Alloy Processed by Equal Channel Angular Extrusion
Mg-5wt.% Sn alloy is often used in portable electronic devices and automobiles. In this study, mechanical properties of Mg-5wt.% Sn alloy processed by Equal Channel Angular Extrusion (ECAE) were characterized. More precisely, its hardness and wear behavior were measured using Vickers hardness test and a pin-on-disc wear test. The microstructures of ECAE-processed Mg-Sn alloys were investigated ...
متن کاملMicrostructure and its Relationship to Mechanical Properties in Equal Channel Angular Rolled Al6061 Alloy Sheets
Equal channel angular rolling (ECAR) is a severe plastic deformation (SPD) technique which has been used to produce metal sheets with ultra-fine grain structure. In the present work, the relationships between the mechanical properties and microstructure of samples during the ECAR process have been investigated. The Rietveld method was applied to analyze the X-ray diffraction pattern and to det...
متن کاملMicrostructure and mechanical properties of AZ91 tubes fabricated by Multi-pass Parallel Tubular Channel Angular Pressing
Parallel Tubular Channel Angular Pressing (PTCAP) process is a novel recently developed severe plastic deformation (SPD) method for producing ultrafine grained (UFG) and nanograined (NG) tubular specimens with excellent mechanical and physical properties. This process has several advantageous compared to its TCAP counterparts. In this paper, a fine grained AZ91 tube was fabricated via multi pas...
متن کامل1 Microstructure , texture and tensile properties of ultrafine / nano grained 1 magnesium alloy processed by accumulative back extrusion
Microstructure, texture and tensile properties of ultrafine/nano grained 1 magnesium alloy processed by accumulative back extrusion 2 3 S.M. Fatemi, A. Zarei-Hanzaki, J.M. Cabrera 4 5 a School of Mechanical Engineering, Shahid Rajaee Teacher Training University, 136-16785, Tehran, Iran 6 b Department of Metallurgical & Materials Engineering, University of Tehran, 515-14395, Tehran, Iran 7 c Dep...
متن کاملMicrostructure and Texture Evolution of the Al-20Sn Alloy Processed by Equal-Channel Angular Pressing using RouteC
1Instituto de Investigaciones en Materiales, Universidad Nacional Autónoma de México, Circuito exterior S/N, Cd. Universitaria, A.P. 70-360, Coyoacán, C.P. 04510, Mexico 2Laboratoire Procédés et Ingénierie en Mécanique et Matériaux, CNRS UMR 8006, ENSAM, 151, bd de Hôpital 75013, Paris, France 3Laboratorio de Microscopía Electrónica, Universidad Autónoma Metropolitana, Unidad Iztapalapa. San Ra...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2019
ISSN: 1996-1944
DOI: 10.3390/ma12061001