An Investigation of High Yield Point Steels

Assessing the Yield Point of Concrete Steels Based upon Known Chemical Composition

The incorporation of recycling, which is the production of raw materials from old buildings and devices, is an increasing trend in industries worldwide. This increase in recycling is motivated by the conservation of energy and environmental resources, in particular, the decrease of carbon dioxide and green house gas emission by the intensive burning during various technological processes. The p...

Crystal Plasticity Constitutive Model for Multiphase Advanced High Strength Steels to Account for Phase Transformation and Yield Point Elongation

High-Strength Bainitic Steels

With careful design, mixed microstructures consisting of fine plates of upper bainitic ferrite separated by thin films of stable retained austenite have exhibited impressive combinations of strength and toughness in highsilicon bainitic steels. The silicon suppresses the precipitation of brittle cementite leading to an improvement in toughness. The essential principles governing the optimisatio...

an investigation into translation of cultural concepts by beginner and advance student using think – aloud protocols

this research aims at answering the questions about translation problems and strategies applied by translators when translating cultural concepts. in order to address this issue, qualitative and quantitative study were conducted on two groups of subjects at imam reza international university of mashhad. these two groups were assigned as beginner and advanced translation students (10 students). ...

High Temperature Behavior of Dual Phase Steels

Dual phase steels with different martensite volume fraction and morphology were tensile tested at a temperature range of 25 to 5500C. Stress-strain curves of all steels showed serration flow at temperatures of 250 and 3500C, and smooth flow at the other temperatures. Both yield and ultimate tensile strengths increased with increasing testing temperature up to about 450<sup...