An investigation into the influence of geometry on compressed earth building blocks using finite element analysis
نویسندگان
چکیده
This paper presents a parametric investigation into the influence of geometry on compressive and flexural strength un-stabilised compressed earth blocks (CEBs). Three CEBs with dissimilar geometric properties were manufactured subjected to physical testing Finite Element Analysis (FEA) using ANSYS Workbench 19.1. The shown be dependent their ranged from 3.74 6.73 MPa 0.63–1.31 respectively. A modified Solid65 element command was utilised within FEA successfully replicate non-linear elasto-plastic behaviour observed in testing.
منابع مشابه
an investigation into translation of cultural concepts by beginner and advance student using think – aloud protocols
this research aims at answering the questions about translation problems and strategies applied by translators when translating cultural concepts. in order to address this issue, qualitative and quantitative study were conducted on two groups of subjects at imam reza international university of mashhad. these two groups were assigned as beginner and advanced translation students (10 students). ...
content analysis of l1 and l2 writing textbooks and the perception analysis of university professors on the influence of english writing expertise on the persian in an efl context
the importance of writing as a complex skill in applied linguistics has drawn the attention of many researchers to evaluate textbooks in order to help learners gain self-sufficiency and autonomy in the field of language use and communication. investigations have shown that developments in textbooks evaluation can promote the quality of pedagogies and consequently the learning. this study attemp...
an investigation into the buckling behavior of the compression members using finite element method
the collapse of a compression member gives rise to decrease of the load carrying capacity of the member. to perform a nonlinear analysis, in addition to the precritical behavior, the post-critical behavior of the compression member also must be determined. in this study, because of certain advantages of the finite element method, this method has been selected to evaluate the axial load-axial di...
متن کاملan investigation into the impact of m-game-enhanced blended module of teaching and learning on iranian students english literacy skills and subskills learning
پژوهش حاضر با پیوند رسانه های قدیمی و جدید یاد دهی و یادگیری _طرح داستان و بازی های همراه ــ در یک پو دمان ترکیبی، در صدد قیاس شیوه ی یاد دهی و یادگیری مبتنی بر بازی مهارت های فرعی و اصلی واژگان، خواندن و نوشتار سواد انگلیسی با شیوه های مرسوم آن بود. به این منظور با کاربرد یک طرح سه گانه همراه با الگوی نظام آموزشی (تومی، 2010)، بازی های از پیش ساخته شده و بومی قابل عرضه از طریق ارتباطات سیّار (ب...
Influence of an Inclusion on Multi-Pass Copper Shaped-Wire Drawing by 2D Finite Element Analysis
The size and length effects of an inclusion on multi-pass copper shaped-wire drawing were investigated. For this purpose, an experimental investigation on optimal die half-angle was conducted. Based on experimental data of optimal die half-angle, wire and inclusion deformations, drawing and hydrostatic stress of copper shaped-wires that contain an inclusion were calculated by two-dimensional fi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Construction and Building Materials
سال: 2021
ISSN: ['1879-0526', '0950-0618']
DOI: https://doi.org/10.1016/j.conbuildmat.2020.121997