An Interleaved Zero-Voltage Zero-Current Switching High Step-Up DC-DC Converter

نویسندگان

چکیده

An interleaved zero-voltage zero-current switching (ZVZCS) high step-up DC-DC converter is proposed for modern photovoltaic power generation systems. The can achieve voltage conversion gain without operating under extreme duty cycles. be readily adjusted by selecting different numbers of the diode-capacitor multiplier (DCM) cells in circuit at design stage. Moreover, with passive snubber converter, all switches and diodes DCMs turn-off turn-on, which effectively reduces losses increases overall efficiency. operational principles analysis performance two are presented demonstrative purpose. effectiveness ZVZCS validated using an 800W experimental prototype.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

High Frequency Dc-dc Converter Design Using Zero Voltage Switching

Resonant mode conversion techniques are used nowadays to improve pulse width modulated dcdc converters. Moreover the quest for ever smaller 50 to 500 watts dc-dc switching supplies has led to the development of circuits that operates in 500 KHz -1 MHz range and above. Since the parasitic elements that normally present in a power circuit can be very significant at this frequency, most of the wor...

متن کامل

Zero Voltage and Zero Current Switching dc-dc converter with active clamping technique

The zero voltage and zero current switching dc-dc converter with active clamping technique is proposed. By adding a secondary active clamp and controlling the clamp switch moderately, ZVS (for leading leg switches) and ZCS (for lagging leg switches) are achieved without any lossy components, the reverse avalanche break down of leading-leg IGHTs or the saturable reactor in the primary. Many adva...

متن کامل

A Zero-Voltage and Zero-Current Switching Full Bridge DC–DC Converter With Transformer Isolation

A new primary-side-assisted zero-voltage and zerocurrent switching full bridge dc–dc converter with transformer isolation is proposed. The proposed dc–dc converter uses only one auxiliary transformer and two diodes to obtain ZCS for the leading leg. It has a simple and robust structure, and load current control capability even in short circuit conditions. Possibility of magnetic saturation due ...

متن کامل

High Step-Up Interleaved DC/DC Converter Using VM Cell for PV Applications

This work proposes a high step-up interleaved dc/dc topology utilizing a VM (voltage multiplier) cell suitable for PV applications. The VM cells D/C (Diode/Cap.) are cascaded among the phases to approach a high voltage gain. Besides, the voltage converting ratio of the presented structure can be improved by extending the VM cells and it also leads to drop in the normalized voltage stress throug...

متن کامل

Simulation of a Zero-Voltage-Switching and Zero-Current-Switching Interleaved Boost And Buck Converter

A novel interleaved boost and buck converter with zero-voltage switching (ZVS) and zero-current switching (ZCS) characteristic is proposed in this paper. By using the interleaved approach, this topology not only decreases the current stress of the main circuit device but also reduces the ripple of the input current and output voltage. Moreover, by establishing the common soft-switching module, ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: IEEE Access

سال: 2021

ISSN: ['2169-3536']

DOI: https://doi.org/10.1109/access.2020.3048387