An innovative flotation technology for the lime-depressed pyrite recovery from copper sulfide ore via acid mine drainage (AMD) activation

Acid Mine drAinAge (AMd) MAnAgeMent

AMd is recognized as one of the most serious environmental problem in the mining industry. the problem of acid mine drainage (AMd) has been present since mining activity began thousands of years ago. Mining activity has disrupted the hydrology of mining areas so badly that it is extremely difficult to predict where water would eventually re-emerge. its causes, treatment have become the focus of...

Recovery of Metals from Acid Mine Drainage

Acid Mine Drainage (AMD) poses a severe pollution problem attributed to current and past mining activities. Low pH, high concentrations of sulphates and various heavy metals makes AMD treatment a major concern because of possible deleterious effects of the effluent on the surroundings. Treatment methods to address AMD focus on neutralizing, stabilizing and removing problem pollutants through va...

Optimization of parameters affecting recovery of copper from Sarcheshmeh low-grade sulfide ore using Bioleaching

In this work, the parameters affecting the recovery of copper from the low-grade sulfide minerals of Sarcheshmeh Copper Mine were studied. A low-grade sulfide ore was used with a copper grade of 0.25%, which was about 28% of the mineral oxide, and the sulfide minerals made up the rest. Much more sulfide minerals were found to be pyrite and most of the gangue minerals were quartz, anorthite, bio...

Acid Mine Drainage: Flow-Through Experiments Examining Pyrite Dissolution Rates

Investigation of Flotation Parameters for Copper Recovery from Enargite and Chalcopyrite Mixed Ore

A flotation pre-treatment study for the separation of enargite (Cu3AsS4) from chalcopyrite (CuFeS2) ores of different origins was investigated in this work. The copper ore bearing enargite mineral contained 5.87mass% As and 16.50mass% Cu while the chalcopyrite bearing ore contained 0.32mass% As and 21.63mass% Cu. The two ore samples were mixed at 7 : 3 (enargite : chalcopyrite) by weight ratio ...