An Ink-Jet Printed Capacitive Sensor for Angular Position/Velocity Measurements
نویسندگان
چکیده
منابع مشابه
An Ink-Jet Printed Eddy Current Position Sensor
An eddy current sensor with an ink-jet printed flexible inductor has been designed and fabricated. The inductor has been designed by means of software developed in-house. It has been fabricated by ink-jet printing with silver ink on a flexible substrate. The inductor is a part of the oscillator circuit whose oscillating frequency is measured by a microcontroller. The sensor characteristics have...
متن کاملInk-Jet Printed Nanoparticle Microelectromechanical Systems
We report a method to additively build threedimensional (3-D) microelectromechanical systems (MEMS) and electrical circuitry by ink-jet printing nanoparticle metal colloids. Fabricating metallic structures from nanoparticles avoids the extreme processing conditions required for standard lithographic fabrication and molten-metal-droplet deposition. Nanoparticles typically measure 1 to 100 nm in ...
متن کاملAll ink-jet printed polyfluorene photosensor for high illuminance detection
An all-printed photosensor based on polyfluorene derivatives has been developed for high illuminance range detection (>100 klux). The active layer is a blend of hole-accepting poly(9,9’-dioctylfluorene-cobis-N,N’-(4-butylphenyl)-bis-N,N’-phenyl-1,4-phenylenediamine) (PFB) and electron-accepting poly(9,9’-dioctylfluorene-co-benzothiadiazole) (F8BT). A top-absorbing architecture was used with pol...
متن کاملQuartz Crystal Micro– Balance Gas Sensor with Ink–jet Printed Nano– Diamond Sensitive Layer
the paper presents fabrication and characterization of a Quartz Crystal Microbalance based gas sensor with a diamond powder sensitive layer deposited using the ink-jet printing technique. The sensor was exposed to a low concentration of ammonia, acetone vapors and different levels of humidity. Impedance characteristics close to the natural resonant frequency of 10 MHz were examined. The sensor ...
متن کاملInk Jet Printed Thin Films on Glass and Polyimide Substrates
Silver conductive thin films deposited on glass and polyimide substrates by using ink jet printing are studied in this work. Characterization of the printed thin films and comparison with sputtered films are investigated. The micro texture, residual stress, adhesion, hardness, optical reflectance, and electric resistance of the thin films are discussed. The result shows that the ink jet printin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Electrical and Computer Engineering
سال: 2016
ISSN: 1582-7445,1844-7600
DOI: 10.4316/aece.2016.04012