An improved technique for molten salt corrosion sample preparation

Development of an Improved Sub-Molten Salt Method for Production of Potassium Titanate from Ilmenite under Industrial Conditions

Instrumental sample-preparation technique for an automated immunohematology assay system.

In the course of the development of an automated immunohematology assay system, we have produced, in prototype form, an instrumental device capable of accepting an unmeasured quantity of whole, anticoagulated blood and deriving from it multiple fixed-volume aliquots of plasma and cells.

Electrochemical Synthesis of Magnesium Hexaboride by Molten Salt Technique

The present work reports electrochemical synthesis of MgB6 from molten salts using the precursor consists of LiF-B2O3-MgCl2. An attempt has been made to synthesize metastable phase MgB6 crystal by electrolysis method. DTA/TGA studies were made to determine the eutectic point of the melt and it was found to be around 900°C. The electrolysis was performed at 900°C under argon atmosphere, at curre...

Corrosion characteristic of AlN, Y2O3, Er2O3 and Al2O3 in Flinak for molten salt blanket system

For liquid breeder blanket system using molten salts, tritium barrier, anti-corrosion barrier, tritium recovery system and heat exchanger make important roles. Especially in the heat exchanger, the tritium permeation from primary coolant loop to secondary coolant loop must be inhibited by the tritium barrier for safety. To develop it, it is essential to optimize chemical stability of the barrie...

Molten-salt Reactor Chemistry

This document summarizes the large program of chemical research and development which led to selection of fuel and coolant compositions for the Molten-Salt Reactor Experiment (MSRE) and for subsequent reactors of this type. Chemical behavior of the LiF-BeFrZrFrUF4 fuel mixture and behavior of fission products during power operation of MSRE are presented. A discussion of the chemical reactions w...