An Improved Approach to the Instantaneous IMEP Method for Piston-Ring Assembly Friction Force Measurement
نویسندگان
چکیده
منابع مشابه
Force-assembly with friction
If an admittance control law is properly designed, a workpiece can be guided into a fixture using only the contact forces for guidance (force-assembly). Previously, we have shown that: 1) a space of accommodation control laws that will ensure force-assembly without friction always exists, and 2) as friction is increased, a control law that allows force-assembly can be obtained as long as the fo...
متن کاملPiston Ring Friction Analysis from Oil Film Thickness Measurements by
The oil film behavior of a series of fifteen lubricating oils was tested in a single cylinder spark ignition engine. The oil film thickness between the piston and cylinder liner of this engine was observed using the Laser Induced Fluorescence (LIF) technique. The data was examined for correlations between physical properties of the oil and characteristics of the oil film. The region of the oil ...
متن کاملCrankshaft Offset and it’s Impact on Piston and Piston Ring Friction Behavior
Increasing fuel economy in modern passenger car engines has become one of the primary development targets, due to swiftly increasing raw oil prices. Initially, vast progress was achieved in the development of the combustion process. Computer Aided Engineering (CAE) has been one of the keys to success; however, further potential is now being investigated. Currently, the primary focus of engine d...
متن کاملSimulation and Modeling of Friction Force and Oil Film Thickness in Piston Ring – Cylinder Liner Assembly of an I. C. Engine
The piston ring assembly is one of the key parts of internal combustion engine. Its performance decides engine power loss to over come friction force and determines the performance of the whole engine. As per the literature review it is reported 40 to 50 % of the total mechanical friction losses in piston ring cylinder wall interface. The present work mainly focused on study of basic tribologic...
متن کاملInvestigation for an Approach to Optimise the Structure of Human Force
Abstract This paper proposes an approach to find an optimum structure for educational levels of human forces. To this end, a Linear Programming (LP) Model integrated with a Social Accounting Matrix (SAM) was employed. The integrated model was employed using the SAM of Golestan Province of Iran. It was demonstrated that when unemployment is the result of inconsistency between supply and demand...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JSME international journal. Ser. 2, Fluids engineering, heat transfer, power, combustion, thermophysical properties
سال: 1992
ISSN: 0914-8817
DOI: 10.1299/jsmeb1988.35.2_310