An improved 9 carat yellow gold casting alloy
نویسندگان
چکیده
منابع مشابه
A Tool for a High-Carat Gold-Standard Word Alignment
In this paper, we describe a tool designed to produce a gold-standard word alignment between a text and its translation with a novel visualization. In addition, the tool is designed to aid the aligners in producing an alignment at a high level of quality and consistency. This tool is presently being used to align the Hebrew Bible with an English translation of it.
متن کاملPlatinum Investment Casting , Part II : Alloy
Two widely used jewellery investment casting alloys (platinum with 5 wt% ruthenium (Pt-5Ru) and platinum with 5 wt% cobalt (Pt-5Co)) suffer from poor castability and other drawbacks. In this work thermodynamic calculations of alloy properties were employed to optimise the alloy compositions. Segregation behaviour appeared to be important for the melting range. Scheil simulations were used to si...
متن کاملDental casting of superelastic Ni-Ti alloy.
Rods of Ni-43.5wt% Ti alloy were prepared under various casting conditions. Specimens which were melted in a cordierite crucible and cast in a phosphate-bonded investment mold had less strength and elongation than those melted in a copper crucible and cast in a phosphate-bonded investment mold. All castings exhibited superelasticity at room temperature. The upper limit of recoverable strain was...
متن کاملNumerical Modeling of Macrosegregation during the Direct-Chill Casting of an Al alloy Billet
ABSTRACT Macrosegregation has been received high attention in the solidification modeling studies. In the present work, a numerical model was developed to predict the macrosegregation during the DC Casting of an Al-4.5wt%Cu billet. The mathematical model developed in this study consists of mass, momentum, energy and species conservation equations for a two-phase mixture of liquid and solid in a...
متن کاملModeling of TiAl Alloy Grating by Investment Casting
The investment casting of TiAl alloys has become the most promising cost-effective technique for manufacturing TiAl components. This study aimed to investigate a series of problems associated with the investment casting of TiAl alloys. The mold filling and solidification of this casting model were numerically simulated using ProCAST. Shrinkage porosity was quantitatively predicted by a built-in...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Gold Bulletin
سال: 1978
ISSN: 0017-1557,2190-7579
DOI: 10.1007/bf03215095