An extended mechanical threshold stress plasticity model: modeling 6061-T6 aluminum alloy
نویسندگان
چکیده
منابع مشابه
Two-dimensional Mapping of Residual Strains in 6061-t6 Aluminum Alloy Friction Stir Welds
The residual strain profiles were measured through the thickness of friction-stir welded (FSW) plates using neutron diffraction to study the relationship between the angular distortion and the residual strain distribution. Three different weld specimens were prepared from a 6061-T6 aluminum alloy with the purpose of separating the effects of the frictional heat and plastic deformation on the re...
متن کاملVoid growth in 6061-aluminum alloy under triaxial stress state
In numerous metals and alloys, ductile fracture involves void nucleation, growth, and coalescence. In this contribution, void growth has been quantitatively characterized in an extruded 6061-wrought Al-alloy as a function of stress state in notch tensile test specimens. Digital image analysis and Stereology have been used to estimate the volume fraction and three-dimensional number density of v...
متن کاملThe effects of maintaining temperature in annealing heat treatment for an FSWed 6061-T6 Al alloy.
The technological development of all kinds of lightweight transportation devices including vehicles, aircraft, ships, etc. has progressed markedly with the demand for energy saving and environmental protection. Aluminum alloy is in the spotlight as it is a suitable environmentally friendly material. However, deformation is a major problem during the welding process because aluminum alloy has a ...
متن کاملWelding Aluminum Alloy 6061 with Opposing Dual Torch Gtaw Process
Cracking is a major concern in welding aluminum alloys. Although weld solidification cracks can be eliminated through addition of filler alloy, the additives modify the alloy or base-metal constituents and may not always be desirable. High-energy beam processes, such as electron-beam welding, that result in minimal heat input reduce crack sensitivity, but their high cost limits their applicatio...
متن کاملAn alternative to increase the mechanical strength of 6061-T6 GMA weldments
Fusion welding of heat treatable aluminum alloys leads to a significant loss of strength in the heat affected zone (HAZ) due to overaging. This work was aimed to improve the mechanical properties of Al-6061 welds. Plates of 6 mm in thickness were solutionised at 530◦C for 1 h followed by water quenching and aging at 160◦C for times between 13 to 19 hours. Welding was performed with the gas meta...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Mechanics of Materials and Structures
سال: 2008
ISSN: 1559-3959,1559-3959
DOI: 10.2140/jomms.2008.3.391