AN EXPERIMENTAL STUDY ON THE FLOW IN COMPOUND SINUOUS CHANNELS
نویسندگان
چکیده
منابع مشابه
Flow Resistance in Sinuous or Irregular Channels
Part 1. The problem and the experiments. General statement-_________________________________ Flow in irregular open channels__________________. Design of experiment_____________._...______ Experimental conditions. ______________________ Experimental results._________________________ Character of the flow; deformation of the free surface. _ _ Conditions below threshold____________________ Condit...
متن کاملAn Experimental Study on Alcohol Flow in Micro-Channels
Experiments were performed to study the flow characteristics of ethanol and methanol flow in rectangular micro-channels using test models 1 and 2 (TM1, TM2). The TM1 and TM2 used were of 47 and 50 micro-channels in rectangular crosssection of equivalent diameters of 387 and 327 m respectively. The channel length of 192 mm were fabricated on a 304 stainless steel substrate (230 mm x 160 mm x 1....
متن کاملthe effects of changing roughness on the flow structure in the bends
flow in natural river bends is a complex and turbulent phenomenon which affects the scour and sedimentations and causes an irregular bed topography on the bed. for the reason, the flow hydralics and the parameters which affect the flow to be studied and understand. in this study the effect of bed and wall roughness using the software fluent discussed in a sharp 90-degree flume bend with 40.3cm ...
Sinuous flow in metals.
Annealed metals are surprisingly difficult to cut, involving high forces and an unusually thick "chip." This anomaly has long been explained, based on ex situ observations, using a model of smooth plastic flow with uniform shear to describe material removal by chip formation. Here we show that this phenomenon is actually the result of a fundamentally different collective deformation mode--sinuo...
متن کاملAn Experimental Study of Compound Control Method around a Cylinder
In this work, the compound flow control method (passive and active) has been described. EHD actuators as wire-plate (active) and splitter plate (passive) were coupled and applied to control fluid flow and heat transfer around cylinder in cross flow. Investigation consists of the interaction between electric field, fluid flow and temperature field. Experimental tests included various positions o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: PROCEEDINGS OF HYDRAULIC ENGINEERING
سال: 1998
ISSN: 0916-7374,1884-9172
DOI: 10.2208/prohe.42.943