An Experimental Study of Evaporation Heat Transfer of Refrigerant HCFC22 Inside an Internally Grooved Horizontal Tube.
نویسندگان
چکیده
منابع مشابه
Experimental Study on the Heat Transfer Performance of a Zeotropic Refrigerant Mixture in Horizontal Tubes
In the present study, the condensation and evaporation heat transfer performance of a zeotropic refrigerant mixture (HFC32/HFC125/HFC134a) inside horizontal tubes with smooth, grooved or cross·grooved inner surfaces was investigated experimentally. The cross-gTOoved tube showed the highest heat transfer coefficient for both condensation and evaporation with the zeotropic mixture. Its heat trans...
متن کاملExperimental and Theoretical Study on Condensation Heat Transfer of Nonazeotropic Refrigerant Mixtures R1234yf/R32 Inside a Horizontal Smooth Tube
The condensation heat transfer characteristics of nonazeotropic mixtures R1234yf and R32 (mass fractions of 0.52:0.48 and 0.77:0.23, respectively) inside a horizontal smooth tube (inner diameter 4 mm) were experimentally studied at mass fluxes ranging from 100 to 300 kg/m s. A prediction model for the forced convective condensation heat transfer characteristics of nonazeotropic refrigerant mixt...
متن کاملIn Tube Evaporation Heat Transfer of Refrigerant Mixtures
Heat transfer coefficient data was taken during in-tube evaporation of five differenct refrigerant mixtures. These measurements were performed in a 318" O.D. (9.7 mm) smooth copper tube at refrigerant temperatures of -zoe and 4°C. Four different mass fluxes ranging from 125 to 375 kg/s-m2 were tested. On a mass basis, the five different mixtures tested were: R-125 (40%) I R-32 (60%), R-32 (30%)...
متن کاملAn Experimental Investigation of Convective Boiling Heat Transfer Using Alternative and Natural Refrigerants Inside Horizontal Microchannels
In present study, the two phase flow boiling heat transfer coefficient and pressure drop of R410A, R32 and R290 in microchannels are demonstrated. The experimental data were conducted in horizontal stainless steel tubes with the inner diameter of 0.3 mm and 1.5 mm. The testing conditions were performed with the mass fluxes range from 200 to 500 kg/m2s, the heat fluxes from 10 to 20 kW/m2, the s...
متن کاملAn Experimental Study of Nanofluids Operated Shell and Tube Heat Exchanger with Air Bubble Injection
Shell and Tube heat exchangers are the heat exchangers that are most widely used in industries and for other commercial purposes. There are many techniques that have been utilized to enhance the heat transfer performance of the shell and tube heat exchangers. Air bubble injection is one of the promising and inexpensive techniques that can create turbulence in the fluids resulting in to enhancem...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JSME International Journal Series B
سال: 1995
ISSN: 1340-8054,1347-5371
DOI: 10.1299/jsmeb.38.618