An Experimental Investigation on Photovoltaic Array Power Output Affected by the Different Partial Shading Conditions
نویسندگان
چکیده
This paper presents an experimental investigation on photovoltaic array (PV array) power output affected by partial shading conditions (PSCs). An experiment setup of a PV with series configuration using 2 × 4 modules modules) was built. The loss due to the effect first cells cell) connected bypass diodes each module, installed in horizontal direction, evaluated. Depending direction sun relative configuration, percentage measured during test and recorded current voltage array. performance evaluation configurations is referred respect values maximum voltage, current, output, losses fill factor (FF). results show that 44% affects more than 80%.
منابع مشابه
Maximum Power Point Tracker for Photovoltaic Systems Based on Moth-Flame Optimization Considering Partial Shading Conditions
The performance of photovoltaic (PV) systems is highly dependent on environmental conditions. Due to probable changes in environmental conditions, the real-time control of PV systems is essential for exploiting their maximum possible power. This paper proposes a new method to track the maximum power point of PV systems using the moth-flame optimization algorithm. In this method, the PV DC-DC co...
متن کاملOn the Impact of Partial Shading on PV Output Power
It is a well-documented fact that partial shading of a photovoltaic array reduces it output power capability. However, the relative amount of such degradation in energy production cannot be determined in a straight forward manner, as it is often not proportional to the shaded area. This paper clarifies the mechanism of partial PV shading on a number of PV cells connected in series and/or parall...
متن کاملAn Improved Photovoltaic Array Configuration for Photovoltaic System in the Presence of Maximum Power Point Tracking during Partial Shading Condition
Power-Voltage (P-V) curve and Current-Voltage (I-V) curve determine the performance of the PV system. In this work, the arrangements of the PV module were reconstructed by adding the number of PV module in 3 strings configuration from 5 to 45. This method enhance the performance of the PV system as it able to show the characteristic of the P-V and I-V curve during partial shading and maximum ir...
متن کاملPhotovoltaic Array Modeling under Uniform Irradiation and Partial Shading Condition
Received Sep 9, 2017 Revised Oct 28, 2017 Accepted Nov 15, 2017 Wind energy and solar energy are the prime energy sources which are being utilized for renewal energy. The performance of a photovoltaic (PV) array for solar energy is affected by temperature, irradiation, shading, and array configuration. Often, the PV arrays are shadowed, completely or partially, by the passing clouds, neighborin...
متن کاملGlobal Maximum Power Point Tracking of Photovoltaic Array under Partial Shaded Conditions
Efficiency of the PV module can be improved by operating at its peak power point so that the maximum power can be delivered to the load under varying environmental conditions. This paper is mainly focused on the maximum power point tracking of solar photovoltaic array (PV) under non uniform insolation conditions. A maximum power point tracker (MPPT) is used for extracting the maximum power from...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energies
سال: 2021
ISSN: ['1996-1073']
DOI: https://doi.org/10.3390/en14092344