An energy model for the transient flow boiling crisis under highly subcooled conditions at atmospheric pressure
نویسندگان
چکیده
We present an original model describing the transient flow boiling crisis of water at high subcooling and atmospheric pressure. hypothesize that in such conditions, mechanism is prevention bubbles recondensation when a thin fluid layer near heated wall reaches temperature saturation conditions. To capture this phenomenon, we propose energy heat exchanges throughout entire from initiation to crisis. bring light non-dimensional mathematical relation capturing 168 working points investigated range power escalation period (from 5 500 ms), 25 75 K) Reynolds number (8,500 35,000) Its fitting accuracy excellent for (50 K above): more than % these are predicted with ± error. This relationship enables prediction critical flux based on steady-state value or single tuning constant. The groups deduced study relevant tools identify major physical phenomena involved quantify impact different operating parameters.
منابع مشابه
Development of a Numerical Model for Subcooled Boiling Flow
Population balance equations combined with a threedimensional two-fluid model are employed to predict bubbly flows with the presence of heat and mass transfer processes. Subcooled boiling flow belongs to this specific category of bubbly flows is considered. The MUSIG (MUltiple-SIze-Group) model implemented in CFX4.4 is further developed to account for the wall nucleation and condensation in the...
متن کاملHighly subcooled pool boiling heat transfer at various gravity levels
A microscale heater array 2:7 mm 2:7 mm in size along with a video camera was used to provide subcooled pool boiling heat transfer measurements at gravity levels ranging from 1.8g to 10 g. The fluid was FC-72 at 1 atm and subcooled by nominally 36 C for all cases. A Terrier–Orion sounding rocket and the KC-135 aircraft were used to provide the microgravity and low-g environments, respectively. ...
متن کاملExperimental Investigation and Theoretical Model for Subcooled Flow Boiling Pressure Drop in Microchannel Heat Sinks
This study examines the pressure drop characteristics of subcooled two-phase microchannel heat sinks. A new model is proposed, which depicts the subcooled flow as consisting of a homogeneous two-phase flow layer near the heated walls of the microchannel and a second subcooled bulk liquid layer. This model is intended for conditions where subcooled flow boiling persists along the entire microcha...
متن کاملCHF model for subcooled flow boiling in Earth gravity and microgravity
This study is the first attempt at extending the Interfacial Lift-off CHF Model to subcooled flow boiling conditions. A new CHF database was generated for FC-72 from ground tests as well as from microgravity tests that were performed in parabolic flight trajectory. These tests also included high-speed video imaging and analysis of the liquid–vapor interface during the CHF transient. Both the CH...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Thermal Sciences
سال: 2021
ISSN: ['1778-4166', '1290-0729']
DOI: https://doi.org/10.1016/j.ijthermalsci.2021.107042