An Efficient Third-Order Full-Discretization Method for Prediction of Regenerative Chatter Stability in Milling
نویسندگان
چکیده
منابع مشابه
Efficient Method for Prediction of Stability in Low Immersion Milling
This paper presents cutting force prediction algorithm for low immersion end-milling, using an efficient dynamic force modeler. The geometric simulation of milling process was performed, using the B-Rep solid modeling techniques. For predicting stability lobes, two methods were used for prediction of stability lobes: the frequency domain technique and the time finite element analysis (TFEA). Th...
متن کاملChatter Stability Characterization of Full-Immersion End-Milling Using a Generalized Modified Map of the Full-Discretization Method, Part 1: Validation of Results and Study of Stability Lobes by Numerical Simulation
The objective in this work is to generate and discuss the stability results of fully-immersed end-milling process with parameters; tool mass m 0.0431kg, tool natural frequency 5700 rads , damping factor ξ 0 . 0 2 and workpiece cutting coefficient C 3.5 10 Nm ⁄ . Different no of teeth is considered for the end-milling. Both 1-DOF and 2-DOF chatter models of the system are generated on the basis ...
متن کاملApproximate stability charts for milling processes using semi-discretization
Unwanted relative vibrations between the tool and the workpiece represent significant challenges in high-speed machining. In order to avoid this problem, one needs to specify ranges for system parameters (spindle speed, depth of cut) for which the process is stable, i.e., to obtain a so-called stability chart. Such stability charts usually can only be given by numerical means which is illustrat...
متن کاملdevelopment and implementation of an optimized control strategy for induction machine in an electric vehicle
in the area of automotive engineering there is a tendency to more electrification of power train. in this work control of an induction machine for the application of electric vehicle is investigated. through the changing operating point of the machine, adapting the rotor magnetization current seems to be useful to increase the machines efficiency. in the literature there are many approaches wh...
15 صفحه اولذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Shock and Vibration
سال: 2020
ISSN: 1070-9622,1875-9203
DOI: 10.1155/2020/9071451