An aromatic ionomer in the anode catalyst layer improves the start-up durability of polymer electrolyte fuel cells

نویسندگان

چکیده

The sulfonated polyphenylene ionomer, SPP-QP, being used as the anode binder, improves durability of polymer electrolyte fuel cells in gas exchange cycle test simulating start-up conditions.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Catalyst supports for polymer electrolyte fuel cells.

A major challenge in obtaining long-term durability in fuel cells is to discover catalyst supports that do not corrode, or corrode much more slowly than the current carbon blacks used in today's polymer electrolyte membrane fuel cells. Such materials must be sufficiently stable at low pH (acidic conditions) and high potential, in contact with the polymer membrane and under exposure to hydrogen ...

متن کامل

F FFC-NMR of Catalyst Layer Materials for Polymer Electrolyte Membrane Fuel Cells

1 H and 19 F spin lattice relaxation rates of catalyst layer materials (CLM) of polymer electrolyte membrane fuel cells were measured by the fast field cycling (FFC) method. In contrast to ionomer membranes, 1 H relaxation rates of adsorbed water in both platinumKetjen black (Pt-KB) catalyst powder and CLM were strongly dependent on Larmor frequency approximated by a power law due to the strong...

متن کامل

Mathematical modelling of the catalyst layer of a polymer electrolyte fuel cell

In this paper, we derive a mathematical model for the cathode catalyst layer of a polymer electrolyte fuel cell. The model explicitly incorporates the restriction placed on oxygen in reaching the reaction sites, capturing the experimentally observed fall in the current density to a limiting value at low cell voltages. Temperature variations and interfacial transfer of O2 between the dissolved a...

متن کامل

Numerical analysis of reactant transport in the novel tubular polymer electrolyte membrane fuel cells

In present work, numerical analysis of three novel PEM fuel cells with tubular geometry was conducted. Tree different cross section was considered for PEM, namely: circular, square and triangular. Similar boundary and operational conditions is applied for all the geometries. At first, the obtained polarization curve for basic architecture fuel cells was validated with experimental data and then...

متن کامل

Scientific aspects of polymer electrolyte fuel cell durability and degradation.

Rod Borup,* Jeremy Meyers,‡ Bryan Pivovar,† Yu Seung Kim,† Rangachary Mukundan,† Nancy Garland,§ Deborah Myers, Mahlon Wilson,† Fernando Garzon,† David Wood,† Piotr Zelenay,† Karren More,⊥ Ken Stroh,† Tom Zawodzinski, James Boncella,† James E. McGrath, Minoru Inaba,# Kenji Miyatake,∇ Michio Hori, Kenichiro Ota, Zempachi Ogumi,£ Seizo Miyata,+ Atsushi Nishikata,¶ Zyun Siroma,∞ Yoshiharu Uchimoto...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Energy advances

سال: 2022

ISSN: ['2753-1457']

DOI: https://doi.org/10.1039/d1ya00024a