An Anti-Corrosion Superhydrophobic Copper Surface Fabricated by Milling and Chemical Deposition
نویسندگان
چکیده
The development of anticorrosion coatings on copper has raised tremendous interest in material science. Using a milling method, regular rough structures were fabricated, and after chemical deposition with AgNO3 solution the modification stearic acid, superhydrophobic substrate could be obtained. surface morphological study showed dendritic microstructure, rectangular bulge produced by was distributed substrate. water contact angle as high 158.4°. best anti-corrosion coating sample milled cutter tip distance 0.30 mm. as-prepared good self-cleaning effect. Scratched knife abraded friction, still maintained nature. mechanically stable possessed corrosion resistance.
منابع مشابه
Synthetic graphene grown by chemical vapor deposition on copper foils
TING FUNG CHUNG∗,‡, TIAN SHEN∗, HELIN CAO∗,‡, LUIS A. JAUREGUI†,‡, WEI WU§, QINGKAI YU¶, DAVID NEWELL‖ and YONG P. CHEN∗,†,‡,∗∗ ∗Department of Physics, West Lafayette, Indiana 47907, USA †School of Electrical and Computer Engineering, West Lafayette, Indiana 47907, USA ‡Birck Nanotechnology Center, Purdue University, West Lafayette, Indiana 47907, USA §Department of Electrical and Computer Engi...
متن کاملSelectivity in copper chemical vapor deposition
The fundamental surface chemistry underlying selectivity in copper chemical vapor deposition (CVD) from COD-Cu-hfac and Cu(hfac), has been determined. Both electronic and chemistry contributions strongly influence the precursor reactivity on oxide as compared to metal surfaces. These results have important implications regarding the role of surface preparation and cleaning for initiating and ma...
متن کاملLayer-by-layer Deposition of TiO2 Nanoparticles in the Wood Surface and its Superhydrophobic Performance
A hydrophilic wood surface was transformed to become superhydrophobic by layer-by-layer (LbL) assembly of polyelectrolyte/titanium dioxide (TiO2) nanoparticles multilayers and subsequent hydrophobic modification with 1H, 1H, 2H, 2H-perfluoroalkyltriethoxysilane (POTS). The chemical composition of the wood samples before and after treatment was characterized by energy dispersive X-ray analysis (...
متن کاملToward a durable superhydrophobic aluminum surface by etching and ZnO nanoparticle deposition.
Fabrication of suitable roughness is a fundamental step for acquiring superhydrophobic surfaces. For this purpose, a deposition of ZnO nanoparticles on Al surface was carried out by simple immersion and ultrasound approaches. Then, surface energy reduction was performed using stearic acid (STA) ethanol solution for both methods. The results demonstrated that ultrasound would lead to more stable...
متن کاملMiniature boats with striking loading capacity fabricated from superhydrophobic copper meshes.
A novel kind of miniature boat that might have many potential applications was fabricated from superhydrophobic copper meshes for the first time. These boats not only floated freely on a water surface but also exhibited striking loading capacities. By selection of the pore size of copper meshes, a loading capacity greater than 11.0 g could be readily achieved for a boat of 8.0 cm(3) in volume. ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Coatings
سال: 2022
ISSN: ['2079-6412']
DOI: https://doi.org/10.3390/coatings12040442